10electrolux
Switching the power function on and off
The power function 
makes more power available to the induction cooking zones, e.g. to bring a large quantity of water to the boil quickly.
The power function is activated for 10 min- utes at most. After that the induction cooking zone automatically switches back to heat setting 9.
| Control panel | Display |
|
To switch on | Touch | The light elements in the | |
|
| control bar light up. The | |
|
| display flashes |
|
To switch off | Select the heat setting | The heat setting selected is | |
| shown in the display. The | ||
|
| display above | will go out. |
|
|
|
|
3If the power function has ended, the cooking zones automatically switch back to the heat setting set previously.
Power Management
The cooking zones of the cooking surface have a maximum power.
The maximum power is reached when the heat setting 9 has been set for all cooking zones.
Two cooking zones generate a pair (see fig- ure) and therefore, the power management shares the maximum available power be- tween these cooking zones.
When the power function is selected for one cooking zone, the power management makes the additional power for this cooking zone available by reducing the power of the corresponding other cooking zone.
Example: the heat setting 9 is selected on one cooking zone. The power function is switched on for the corresponding cooking zone. The power function is carried out but the heat setting 9 of one of the cooking zones and the power function for the other cooking zone of the pair exceed the maxi- mum power for both at the same time. For this purpose, the power management reduc- es the power of the cooking zone that switched on first from 9 to example 5 and the display of this cooking zone changes be- tween 9 and 5 and then stays at the current possible maximum 5. (If the display changes between 9 and 5 or 9 and 3 or another value depends on the type of appliance and the size of the cooking zone.).
