Electrolux EHD 60150 IAU Setting the heat setting, Locking/unlocking the control panel, Display

Setting the heat setting

The control bar is touched where the desired heat setting is positioned. The heat setting is shown in the display. Correct to the left or the right, if necessary.

electrolux 7

Do not release before the desired heat set- ting is reached.

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.

	Control panel	Display
To switch on	Touch	lights up
To switch off	Touch	goes out

3When you switch the appliance off, the locking function is automatically switched off.

Turning the STOP+GO function on and off

The STOP+GO function simultaneously tog- gles all active cooking zones to keep-warm mode then back to the heat setting they were at before.

	Control panel	Display
To switch on	Touch	Keep-warm setting
To switch off	Touch	Previous heat setting (not automatic
		warm-up or power function)
3 STOP+GO does not stop timer func-		3 STOP+GO controls the entire control
tions.		panel apart from the sensor field .