Multicell system
81
I_KAP05.FM5 Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Multicell system

Step-by-step procedure

Follow the procedure described below step by step in order to incorporate your Gigaset
2060isdn in a multicell system.
At all base stations you can:
●be reached under the same external number (MSN).
●conduct calls under the same external number (MSN).
●manually switch from base station to base station with an external call in progress.
Internal connections are possible only at the same base station, in other words you cannot set
up an internal connection across base stations.

Preparations

1.Read the general remarks (➔page 82).
2. Connect multiple base stations to a common point-to-multipoint access (➔page 10).
3. Register the mobile units at the other base stations, using the same internal num-
bers in each case (➔page 11)
4. Set the same ring allocation at all base stations (assign internal numbers to the same
MSN) (➔page 14)

Configure base stations for multicell operation

1.Set all base stations for multicell operation (➔page 85)
2. Set “Allow base station switch during call” at all base stations (➔page 87)
3. Activate display of base station numbers on 2000S mobile units (➔page 66)
4. Set automatic base station selection (➔page 86)

The multicell functions are now available.