Basic settings
22
I_KAP03.FM5 Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Basic settings

Entering/changing the system code

For the sake of security you should enter your own, cus-
tom, four-digit system code. This code prevents unautho-
rized changes to your settings and the registration of fur-
ther mobile units without your permission.
You must make all your entries from a mobile unit. The de-
fault system code is “0000”.
t Meaning: see footnote
You must make all your entries from a mobile
unit. When you select “System settings” from
the menu you are always prompted for the sys-
tem code. The default system code is “0000”.
ŽThe comfort mobile unit is idle.
.tService tSystem settings tChange sys. code
oSelect “System settings”, enter the 4-digit system code
and press “OK” to confirm.
oEnter the new system code and be sure to memorize
it!
Each digit you enter replaces a dash. You can use
to correct your entry if necessary.
xConfirm your entry.
o xEnter the new system code again and press “OK” to con-
clude the procedure.
X
OK
OK
You will hear a negative acknowledgment tone if
the system code you enter is incorrect. If you
forget your system code you will have to call in
technical support to have the code reinitialized.
Forgetting your system code is like losing a key.
Contact your retailer if you forget the system
code.
t
means: browse with
u
or
u
and
press
x
to confirm
Z
NEXT