Siemens 2060isdn manual Installation System code, Press

8.12.98 I_KAP01.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Installation

1… 8

x OK

System code

3. Then back to the mobile unit

Key in the internal number you want to assign to the mo- bile unit.

Confirm your choice of internal number. This concludes the registration procedure and a message to this effect appears in the display, for example “Unit registered with internal No. 2”.

●You can register your comfort mobile unit at a maxi- mum of six base stations.

●You can register a maximum of 8 mobile units at a base station. If you start the registration procedure and 8 mobile units are already registered, the mes- sage “No free internal No.” appears in the display when you enter the system code.

●If is advisable to have base-station number display ac- tivated if you have your mobile unit registered at more than one base station.

As described in the instructions for the procedures in- volved, you have to enter the four-digit system code in or- der to initialize your base station or change settings. The default system code is “0000”.You have to use this default system code when you register the first mobile unit. There is a separate mobile-unit PIN which you use to lock a particular mobile unit.

It is advisable to change the system code after you register the first mobile unit (see “Entering the PIN“ in the User Guide for the mobile unit and page 22). The system code “locks” your system to prevent unauthorized access. No fur- ther mobile units can be registered or changes made to system settings without this system code.

tmeans: browse with u

Z or u NEXT

and press x

OK to confirm 13