41
Cordless Telephone
Handset Settings
Call Options
To exit the operation, press at any time.
Call Bar ON/OFF
When this feature is set to ON, outgoing calls cannot be made. Only intercom and calls
assigned as emergency numbers can be made (see Setting the Emergency Calls on
page 46).
•While the Call Bar mode is turned on, “ ” is displayed.
Setting the Direct Call Number
After a direct call number has been set and the feature has been turned on, you can dial
only the direct call number by pressing or . When this feature is ON,
emergency calls cannot be made. However, incoming calls can be answered.
•While the direct call mode is turned on, “ ” is displayed.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Handset”.
3
Select “Call
Option”.
Go to step 4.
Follow steps 1 to 3 shown above, then:
4
Select “Call Bar”.
5
Enter 4-digit Handset
PIN.
(Factory Preset
0000)
6
Select “On” or “Off”.
Follow steps 1 to 3 shown above, then:
4
Select “Direct Call
No.”.
5
Enter Direct Call
Number.
(max. 24 digits)
6
Press JOYSTICK.
7
Select “Save”.
8
Select “On”.
510NZ_e.book Page 41 Tuesday, July 15, 2003 1:32 PM