Panasonic KX-TCD510NZ - page 48

48
Base Unit Settings
Other Options
To exit the operation, press at any time.
Changing the Base Unit PIN (Personal Identification Number)
The factory preset is 0000.
Resetting the Base Unit Settings
1
Press JOYSTICK
(or move).
2
Select “ Setting
Base”.
3
Enter 4-digit Base
Unit PIN.
(Factory Preset
0000)
4
Select “Other Option”.
Go to step 5.
Once you have programmed the base unit PIN, you cannot recall it. We recommend
that you write down the base unit PIN. If you forget it, please consult your nearest
Panasonic Service Centre.
Follow steps 1 to 4 shown above, then:
5
Select “Change Base
PIN”.
6
Enter new 4-digit Base
Unit PIN.
7
Enter new PIN again
to verify.
You can reset all of the base unit settings to their initial settings.
Follow steps 1 to 4 shown above, then:
5
Select “Reset Base”.
6
Select “Yes”, then “Deleted” is displayed.
510NZ_e.book Page 48 Tuesday, July 15, 2003 1:32 PM