Base Unit Settings
Selecting the Recall Time
You can change the duration of the recall time depending on the requirements of your telephone company or PBX.
Follow steps 1 to 4 of Call Options on the previous page, then:
5 Select “Recall”. | 6 Select “Type 1” (100 ms), “Type 2” (600 ms) or | |||
|
| “Type 3” (200 ms). | ||
|
|
|
|
|
•The factory preset is “Type 2” (600 ms).
Selecting the Pause Time
You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.
Follow steps 1 to 4 of Call Options on the previous page, then:
5 Select “Pause Time”. | 6 Select “Short” (3 sec.) or “Long” (5 sec.). | ||||
|
|
|
|
|
|
•The factory preset is “Short”.
Setting the Emergency Calls
With the handset in Call Bar Mode, you can still make an emergency call.
Follow steps 1 to 4 of Call Options on the previous page, then:
5
7
Select “Emergency Call”. | 6 | Select “Emergency Call1” to |
|
| “Emergency Call5”. |
Enter Emergency Call Number. | 8 | Press JOYSTICK. |
•The factory preset is 111, 911 and 999.
NOTE: The factory preset Emergency Call numbers are stored in the first 3 “Emergency Call” locations, it is recommended that you do not overwrite these numbers.
46
