52
Multi-Unit User Operations
Cancelling a Handset
Each handset can cancel itself or another handset. This feature is usually used to cancel
a link between Handset and Base Unit.
To exit the operation, press at any time.
Cancelling a Base Unit
If another handset is out of range and/or power is OFF when Cancelling a Handset, the
previous base unit number will still remain in the cancelled handset. Therefore, you need
to cancel the base unit registered in the cancelled handset.
To exit the operation, press at any time.
1
Press JOYSTICK (or move).
2
Select “ Setting Base”.
3
Enter 4-digit Base Unit PIN.
(Factory Preset 0000)
4
Select “Cancel Handset”.
5
Search and press RIGHT SOFT
KEY to attach “ ” to the
handset(s) to cancel.
6
Press JOYSTICK.
Follow steps 1 to 3 on the previous page, then:
4
Select “Cancel Base”.
5
Enter 4-digit Handset PIN.
(Factory Preset 0000)
6
Search and press RIGHT SOFT KEY
to attach “ ” to the base unit to
cancel.
7
Press JOYSTICK.
8
Select “Yes”, then “Deleted” is
displayed.
510NZ_e.book Page 52 Tuesday, July 15, 2003 1:32 PM