Panasonic KX-TCD510NZ Remote Operation from a Touch Tone Phone, Setting the Remote Code OFF

Answering System

Remote Operation from a Touch Tone Phone

You can operate the answering system from any touch tone phone.

Firstly you must store your remote code using the handset near the base unit. The 3-digit remote code prevents unauthorised use of your answering system for listening to recorded messages.

Setting the Remote Code ON

1	Press JOYSTICK	2	Select “	TAM	3	Select “Setting
	(or move).		Operation”.			TAM”.
4	Select “Remote	5	Enter 3-digit Remote		6	Press JOYSTICK.
	Code”.		Code.

Setting the Remote Code OFF

Follow steps 1 to 4 shown above, then:

5 Press x. 6 Press JOYSTICK.

•The factory preset is Remote Code OFF.

Turning ON the Answering System Remotely

You can turn on the answering system from any touch tone phone.

1	Call from a touch tone phone	2	Enter Remote Code within 10 seconds after a
	then wait for 15 rings.		long beep.
	Re-enter the Remote Code	4	Voice menu starts after 3 seconds.
3 after the greeting message			Follow the guidance (see page 70).

playback.

OR

Enter your desired direct remote command (see next page).

•If your remote code is not stored, you cannot turn on the answering system remotely.

68