12
Setting up
Power ON/OFF
Power ON Power OFF
Selecting the Display Language
You can select one of 19 languages. The factory preset is English.
To exit the operation, press at any time.
•If you set a language you cannot read, reset the handset to its initial settings.
Press Press Move Press Move Press Move
Press Enter 4-digit Handset PIN (Factory Preset 0000) Move Press
All handset settings will be reset to their initial settings (p.44), however, the
phonebook data will be saved.
Press and hold
POWER.
When POWER is
released, the
display changes
to the standby
mode.
Press and hold
POWER.The display goes
blank.
1
Press JOYSTICK
(or move).
2
Select “
Setting Handset”.
3
Select “Display
Option”.
4
Select “Select
Language”.
5
Select the desired
language.
510NZ_e.book Page 12 Tuesday, July 15, 2003 1:32 PM