Panasonic KX-TCD510NZ Other Options, Setting the Direct Call ON/OFF, Select Direct On/Off

Handset Settings

Setting the Direct Call ON/OFF

Follow steps 1 to 3 on the previous page, then:

4 Select “Direct On/Off”. 5 Select “On” or “Off”.

•If the direct call mode is turned off, “ ” will disappear.

•If you did not set the Direct Call Number and select “On” in step 5, “Enter Phone

No” will be displayed. Enter the number, then press twice.

Other Options

To exit the operation, press at any time.

1	Press JOYSTICK	2 Select “		Setting	3 Select “Other
	(or move).	Handset	”.		Option”.

Go to step 4.

Changing the Handset PIN (Personal Identification Number)

The factory preset is 0000.

Once you have programmed the handset PIN, you cannot recall it. We recommend that you write down the handset PIN. If you forget it, please consult your nearest Panasonic Service Centre.

Follow steps 1 to 3 shown above, then:

4	Select “Change H/S PIN”.	5	Enter current 4-digit Handset PIN.
6	Enter new 4-digit Handset PIN.	7	Enter new 4-digit Handset PIN again
			to verify.

42