S e t t i n g s
Security level > Phone — to set the phone to ask for the security code whenever a new SIM card is inserted into the phone. If you select Memory, the phone asks for the security code when the SIM card memory is selected, and you want to change the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or barring password
Code in use — to select whether the PIN code or UPIN code should be active
Authority certificates or User certificates — to view the list of the authority or user certificates downloaded into your phone. See ”Certificates” p. 80.
Security module sett. — to view Secur. module details, activate Module PIN request, or change the module PIN and signing PIN. See also ”Access codes” p. 11.
■Restore factory settings
To reset some of the menu settings to their original values, select Menu > Settings > Rest. factory sett.. Enter the security code. The names and phone numbers saved in Contacts are not deleted.
■Phone software updates
Your service provider may send phone software updates over the air directly to your device (network service). This option may not be available, depending on your phone and network.
Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the installation is completed and the device is restarted. Be sure to back up data before accepting installation of an update.
Settings
This option may not be available, depending on your phone. To allowed or disallow phone software updates, select Menu > Settings > Configuration > Device manager sett. > Serv. softw. updates and following options:
Always allow — to perform all software downloads and updates automatically
Always reject — to reject all software updates
Confirm first — to perform software downloads and updates only after your confirmation (default setting)
55 | Copyright © 2006 Nokia. All rights reserved. |
