C a l l f u n c t i o n s
1.In the standby mode, press and hold the right selection key or, press and hold the volume down key. A short tone is played, and Speak now is displayed.
2.Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. If the result is not the correct one, scroll to another entry.
Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in ”My shortcuts” p. 46.
■Answer or reject a call
To answer an incoming call, press the call key. To end the call, press the end key.
To reject an incoming call, press the end key. To mute the ringing tone, select Silence.
Call waiting
To answer the waiting call during an active call (network service), press the call key. The first call is put on hold. To end the active call, press the end key.
To activate the Call waiting function, see ”Call” p. 51.
■Options during a call
Many of the options that you can use during a call are network services. For availability, contact your service provider.
During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice clarity, Loudspeaker or Handset.
Network services options are Answer or Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following:
Send DTMF — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer — to connect a call on hold to an active call and disconnect yourself
Conference — to make a conference call
Private call
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
23 | Copyright © 2006 Nokia. All rights reserved. |
