S e t t i n g s

USB data cable

You can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite.

To activate the phone for data transfer or image printing, connect the data cable. Confirm USB data cable connected. Select mode. and select from the following options:

Nokia mode — to use the cable for PC Suite

Printing & media — to use the phone with a PictBridge compatible printer or with your compatible PC

Data storage — to connect to a PC that does not have Nokia software and use the phone as a data storage device

To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Nokia mode, Printing & media, or Data storage.

Call

Select Menu > Settings > Call and from the following options:

Call divert — to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in ”Security” p. 54.

Voice clarity > Active — to enhance speech intelligibility especially in noisy environments

Anykey answer > On — to answer an incoming call by briefly pressing any key, except the power key, the left and right selection keys, or the end key

Automatic redial > On — to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt

Speed dialling > On — to dial the names and phone numbers assigned to the speed-dialing keys 2 to 9 by pressing and holding the corresponding number key

Call waiting > Activate — to have the network notify you of an incoming call while you have a call in progress (network service). See ”Call waiting” p. 23.

Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each call

51

Copyright © 2006 Nokia. All rights reserved.

Page 52
Image 52
Nokia 6300 manual Call, USB data cable, Nokia mode to use the cable for PC Suite