51
Cordless Telephone
Multi-Unit User Operations
Handset Registration to a Base Unit
The handset supplied with the base unit is already registered. If an optional handset is
purchased, it must be registered as follows.
Charge the optional handset batteries for 7 hours before initial use.
Handset registration must be completed within 1 minute after pressing . If
over 1 minute, press then start over again.
To exit the operation, press at any time.
•If you enter an incorrect Base Unit PIN, the error tone will sound. Please repeat from
step 1.
•The handset main menu may change corresponding to the base unit that it is
registered to.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Handset”.
3
Select
“Registration”.
4
Select “Register
H/set”.
5
Press and hold on the Base Unit (for about 3
seconds) until the tone sounds.
•If all registered handset(s) start ringing (paging), press
to stop paging then start over again.
6
Select the desired
base unit.
7
Enter 4-digit Base Unit
PIN.
(Factory Preset 0000)
8
Press JOYSTICK.
When a handset is registered successfully, a confirmation tone sounds and the “ ”
icon is displayed.
510NZ_e.book Page 51 Tuesday, July 15, 2003 1:32 PM