27

y e terminals (PCs) connecting to the gateway through the WLAN cannot access
y s
y
2.4 GHz to 2.4835 GHz.
22 MHz frequency band. The available channels
Auto

Confi the 802.11 Mode

T ur availabl

Enabling or Disabling the AP Isolation

On: Th
each other.
yOff:
The terminals (PCs) connecting to the gateway through the WLAN can access each
other.

Selecting the WLAN Channel

Country: It is used to identify the country. Different countries have different standard
on channel usage.
Channel: It refers to the channel that the gateway works with. According to the
IEEE802.11 standard, the working frequency for the WLAN adopting the Direct
Sequence Spread Spectrum (DSSS) technology ranges from
Each channel occupies a neighboring
vary with the selected country. If you do not know which channel to select, select
and the gateway can automatically search for the channel.

guring

here are fo e modes, as shown in the following table.
Mode Description
54g Auto The WLAN has the best compatibility in this mode.
54g Performance The WLAN has the best performance in this mode.
54g LRS ifficulties in communicating with devices
IEEE 802.11b standards, select this mode.
If the E960 has d
conforming to the
802.11b Only The E960 can only work in the low performance 802.11b standard
network mode.

Configur ransmission Rate ing the T

1. Select Auto, the E960 automatically searches the transmission rate. The maximum
WLAN transmission rate supported by the gateway is 54 Mbit/s.
2. Click to submit the setting.
3. Click Advanced to configure the advanced WLAN setting.
tings Advanced WLAN Set
You can configure the security and Network Bridge.

Configuring Security Key

A security key can protect your WLAN from illegal data attacking. The security key o
wireless gateway must be consistent with that of the PC. f your