27

Sorting TV channels with 'Follow TV'

This function changes the order of the TV channels stored in your
DVD recorder to match the order on the TV.
This only works if the DVD recorder ( EXT1 TO TV-I/O Nsocket)
and the TV are connected with a scart cable.
Preparation:
•) Switch on the TV, and if necessary, select the programme number
for the DVD recorder.
•) Switch on the DVD recorder.
1Press the BROWSER HDD Hand then the SYSTEM
MENU Abutton on the remote control.
PThe 'SYSTEM MENU' appears.
2Select 'Set up' using BO.
3Press CMto select 'System'.
4Select the line 'Installation' using BOand confirm with
CM.
PA message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
OIf the 'Time Shift Buffer ' contains important recordings, save
them with the REC/OTR n1button first. Refer to the
chapter 'The Time Shift Buffer'.
5Select 'Yes' with DKand confirm with OK L.
OIf the message window was closed, confirm the line with
CMagain.
6Select line 'Follow TV' with BOor AIand confirm with
the CMbutton.
7Confirm the message on the screen with OK L.
P'TV 01' will appear in the DVD recorder display.
TV 01
8Select programme number '1' on the TV.
aI cannot switch my TV to programme number '1'
bIf you have connected additional devices to the EXT2
AUX-I/O Msocket, please disconnect these devices. Other connected
devices may have switched the TV to the programme number of the scart
socket.
9Confirm with OK Lon the DVD recorder remote control.
P'WAIT' will appear in the display.
PThe DVD recorder compares the TV channels on the TV and
the DVD recorder.
If the DVD recorder finds the same TV channel as on the TV
it stores it at 'P01'.
a'NOTV' will appear in the display.
The DVD recorder is not receiving a video signal from the TV.
bChech the connectors at both ends of the scart cable.
bCheck your TV's operating instructions to see which scart socket isused
for video signals.
bIf the problem persists, you won't be able to use this feature.
Please read 'Sorting and deleting TV channels manually'.
0Wait until for example 'TV 02' appears in the display.
TV 02
ASelect the next programme number on the TV, e.g. '2'.
BConfirm with OK Lon the DVD recorder remote control.
OIf you confirmed the wrong TV channel, you can delete the
last allocation with DK.
CRepeat steps 0to Buntil you have assigned all the TV
channels from your TV.
ÀTo end, press SYSTEM MENU A.
a'Switch off recorder, new preset' appears on the screen
bIn order to transfer the new TV channel order to the GUIDE Plus+®
system, it is necessary to switch off the DVD recorder
(STANDBY m2). Wait for approx. 4 minutes before you switch the
DVD recorder on again.
bIf this message appears after you switch on the DVD recorder, it was not
possible to complete the transfer process. Switch off the DVD recorder
using STANDBY m2.
Additional installation features