Philips DVDR 725H/05 manual How to change or delete a programmed recording Timer

Programming a recording (TIMER)

How to change or delete a programmed recording (TIMER)

Preparation:

•) Switch on the TV, and if necessary, select the programme number for the DVD recorder.

•) Switch on the DVD recorder.

1Press TIMER s 7 on the remote control while the DVD recorder is switched on.

P The 'Schedule' screen will appear.

		Frequency		VPS/PDC	Home
, Single recording
Grid		Search		Schedule	Info
/Record					Freq. Timing
21-Oct	20:00 21:30		BBC1		Once	+0
21-Oct	Matrix				Once	0

2Use B O or A I to select the programmed recording you want to change or delete.

Depending on the programming method (using GUIDE Plus+® system, with/without VIDEO Plus® system), it is not possible to carry out certain changes using the function buttons. Therefore, always check the function of the corresponding button (description in the colour field) before pressing the button.

Delete programmed recording

Press the red action button D in the left tile.

Changing the TV channel

You can make this change only for recordings that were not set using the 'Grid' screen.

In the case of recordings using the 'Grid' screen, centre tile is not available.

-Select the centre tile with C M .

-Press the yellow function button F .

-Select the TV channel you want using the number buttons 0..9 . External sockets (e.g. EXT2 AUX-I/O) can be selected using

B O , A I .

-Confirm with OK L .

Activate VPS/PDC

Keep pressing the yellow function button F in the right tile until 'VPS/PDC' appears in the 'Timing' line instead of the time.

If you programm a recording using the GUIDE Plus+® System, the VPS/PDC time will be taken automatically. VPS/PDC can be switched on or off without readjusting the start time.

Setting up repeat recordings

You can choose from the following settings in the right tile using the green function button E :

'Frequency' ':Once': Once recordings

'M-F': Repeated daily recordings (Monday to Friday).

'Mon': Repeated weekly recordings (every week on the same day, e.g. Monday).

3To end, press TIMER s 7 .

A message appears few minutes before the recording is about to start if the DVD-recorder is tuned to a different TV channel as programmed. If you confirm this message the TV channel will be changed and the recording started.

Cancel a programmed recording in progress

A programmed recording will run as long as the end of the TV show is reached (end time of the schedule or end time out of the GUIDE Plus+® system)

If you switch off the DVD-Recorder with STANDBY m 2 the DVD-Recorder will be switched off after the recording is completed. If you want to cancel the programmed recording proceed as follows:

1If necessary, switch the TV to the programme number (input socket) of the DVD recorder.

2If necessary switch the DVD-recorder on using STANDBY m 2 .

3Press STOP h N .

OIf you want to end the recording, select 'Yes' with D K and confirm with OK L .

OIf you do not want to end the recording, confirm 'No' using OK L .

OThe programmed recording can also be canceled as described in the previous section 'How to change or delete a programmed recording (Timer)'.

PA message appears on the screen, asking whether you really want to end the recording.

67