Kenmore 625.34846 warranty PROG,RAM the Timer, SET Present Time of DAY

SECTION 1	WATERsOrrE.ERSTART-UP
t	I
1C.	PROG,RAM THE TIMER

DOWN

UP buaon button

F

m

	lmNla=m=_
(_\	--"'--"	J
ON/OFF - HOLD butto_	SELECT butlon
(RECHARGE TONIGHT- NOW)

When the transformer is plugged in, the model code SC21 shows in the face plate display for a few seconds, followed by a test number (exam- ple: $4.0). After the test number, 12:00 AM

begins to flash. PRESENT TIME and RE- CHARGE TONIGHT show at the bottom of the

display.

I	I	m_	p4p_	.
		•	•e el
		II_"_ _l"_e"	.e	•

NOTE:

If SC - - flashes in the display, press the UP button (FIG. 1) until SC21 does show. Then

press the SELECT button to display the flashing 12:00 AM. IF OTHER THAN SC21 SHOWS

when the transtormer ts pluggeo in, please see page 1/ to reset.

SOUND =BEEPER': A =beeper" sounds while pressing buttons for timer set-up. One beep

signals a change in the face plate display. Repeated beeps means the timer will not accept a change from the button you have pressed, telling you to use another button. For example, while setting the hardness (step 2), the beeper sounds repeatedly when the display reaches 1 using the DOWN button, or the highest hardness setting using the UP button.

1.SET PRESENT TIME OF DAY:

NOTE:

if the words... PRESENT TiME do not show in the display, press the SELECT button (FIG.

1)until they do.

•Press the [;_IUP/DOWN _]buttons to set the present time. Press UP to move the display ahead; press DOWN to move the time backward.

noon,=eand midnight,tmei,be sure PM shows.

w,

If the present time is between l= =,_,p" midnight and noon, be sure AM t_s=_ _,=

shows.

NOTE:

Each press of the UP/DOWN buttons changes the time by 1 minute. Holding the buttons in changes the time 32 minutes each second.

6