103
PROBLEM/HINTS SOLUTION
Hidden scenes on aDVD+RW are stillvisible on myDVD9Player
bIf a DVD+RW was edited with the 'Edit' function (button EDIT 6) the function 'Make edits
compatible' should be used. Otherwise the old titlesand also the 'hidden scenes' are still visible.
To modify the DVD+RW proceed as follows:
1Insert the DVD+RW you want to prepare.
2Press DISC MENU Bto call up the index screen.
3Select the first title using AIor the STOP hNbutton.
4Press AI.
5Press CMand select 'Make edits compatible' using AIor BOand confirm with
OK L.
6Press OK Lto start the process.
7When the process is complete, the index screen appears.
Other disc errors(DVD+RW)
bIf it is impossible to play back a disc, you can try and repair it for new recordingsusing the following function.
This will only prepare the disc for erasing. It will not be erased, however, until the recording has been
completed.
1Clean the disc
2Open the disc tray with OPEN/CLOSE J3. Insert the disc but do not close the tray.
3Hold down the red function button Don the remote control until the tray closes. The disc is
prepared for erasing.
4Start recording as with an empty disc.
Other disc errors(DVD+R), 'Disccontains unknowndata' interruption of arecording (poweroutage)
bThis message may appear if you instert a DVD+R that was not finalised or an error occurs during the
recording. DVD+R's that have not been finalised are very sensitive to fingerprints, dust, or dirt. This may
cause problems during recording.
To use the disc again, follow the next steps
1Make sure that the surface of the disc is clean.
2Open the disc tray with OPEN/CLOSE J3. Insert the defect DVD+R but do not close
the tray.
3Hold down 5on the remote control until the tray closes. The disc will be read ('READING'
appears on the display) and the DVD recorder will start the repair process. This may take up
to four times as much time as the recording, in which the error occurred.
4If the disc is recovered, the index screen will appear.
Please observe the following:
The recovering procedure is successfully only if there was a previous recording on the disc.
Error during recording: The title may be missing.
Error while changing the title/index picture: The original title/index picture may be visible.
Error while finalising: The disc appears not to have been finalised.
The index screenflickers when a DVD+Ris inserted
bYou can finalise the disc using the followingfunction:
1Open the disc tray with OPEN/CLOSE J3. Insert the defect DVD+R but do not close
the tray.
2Hold down 4on the remote control until the tray closes.
'FINALIZING' appears in the display. Finalising begins. This may take up to three minutes.
3If finalising has been successful, the index screen will appear.
If I switch on a device,connected to theEXT2AUX-I/O Msocket, theDVD9Recorder starts arecording.
bThe function 'Automatic Satellite Recording' is switched on.
If the DVD-Recorder is switched off, the symbol 'SAT' appears in the bottom left cornerof the display.
If the DVD-Recorder is switched on, instead of the clock, '__:__' appears with a red background in the
'Tuner-Info-Field' (bottom left corner of the screen)
To switch off the function proceed as follows:
1Press BROWSER HDD Hand then SYSTEM MENU A.
2Select 'Preferences' with BO.
3Press CMto select 'Recording'.
4Select 'Sat record' (second menu page) using BO.
5Select 'Off' using CM.
6End with SYSTEM MENU A.
Before you call an engineer