Philips DVDR 725H/05 manual Automatic TV channel search Autoinstall

Additional installation features

Automatic TV channel search (Autoinstall)

If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the DVD recorder, e.g. after moving house, you can start this procedure again. This will replace the stored TV channels with the new ones.

Preparation:

•) Switch on the TV, and if necessary, select the programme number for the DVD recorder.

•) Switch on the DVD recorder.

1Press the BROWSER HDD H button and then the SYSTEM MENU A button on the remote control.

P The 'SYSTEM MENU' appears.

2Select 'Set up' using B O .

3Press C M to select 'System'.

4Select the line 'Installation' using B O and confirm with

C M .

P A message appears on the screen that the change of this setting will flush the 'Time Shift Buffer'.

O If the 'Time Shift Buffer ' contains important recordings, save them with the REC/OTR n 1 button first. Refer to the chapter 'The Time Shift Buffer'.

5Select 'Yes' with D K and confirm with OK L .

O If the message window was closed, confirm the line with C M again.

6Select 'Autoinstall' using B O or A I .

7Press C M .

P 'Autoinstall' starts. This allows the DVD recorder to save all available TV channels. This procedure may take several minutes.

Installation

Autoinstall

Searching for TV channels

00 Channels found

h______________

Please wait

PWhen all the TV channels have been found, 'Autoinstall complete' will appear on the TV screen.

8To end, press SYSTEM MENU A .

You can read about how to search for a TV channel manually in 'Manual TV channel search'.

ENGLISH

30