Philips DVDR 725H/05 manual Initial Installation, Connecting to the mains, No aerial connected

Initial Installation

Connecting to the mains

Always ensure the local mains voltage matches the voltage range printed on the type plate at the back or bottom of the DVD-recorder. If not, consult your dealer or Philips customer support.

1Switch on the TV.

2Insert the supplied mains cable D into the socket

4MAINS J at the back of the DVD recorder and the plug into the wall socket.

ENGLISH

PThe most important features of the DVD recorder appear as scrolling text on the display.

After the first installation is completed (all TV channels installed) this function will be switched off.

Initial installation

After successfully connecting your DVD recorder to the TV and other additional devices, the initial installation can start. After the basic settings for DVD-playback, the DVD recorder automatically seeks and stores all available TV channels.

The settings can be changed later. Refer to 'User Preferences/Settings II'.

Switching on additional devices

If you have connected additional devices such as a satellite receiver to the aerial cable, switch them on. The automatic channel search will recognise it and save it. Please observe that you must switch on a "test signal" for some additional devices.

No aerial connected

Even if you only want to use the DVD recorder to play back or have only connected a satellite receiver, you must still complete the initial installation. This is necessary so that the basic settings are stored correctly. Once initial installation is complete you can use the DVD recorder as normal.

1Press STANDBY m 2 on the remote control or STANDBY-ONm 1 on the front.

P '￿￿￿￿￿￿￿' and then '￿￿ ￿￿ ￿￿￿' will appear on the display.

P If your TV automatically switched to the programme number for the input socket, e.g. 'EXT', '0', 'AV', you see the following screen:

Virgin mode

Menu Language

English

Español

Français

Italiano

Deutsch

Press OK to continue

aMy screen is empty.

bDepending on the initialisation procedure it can take some time before the picture appears. Please press no button in the meantime.

b If the TV does not automatically switch to the programme number of the input socket, select the corresponding programme number on your TV manually (see your TV's operating instructions).

b Check that the scart cable is connected from the TV to the EXT1 TO TV-I/ON socket on the DVD recorder. The EXT2 AUX-I/OM socket is only intended for additional devices.

18