10
EN
PLAYBACK
(cont.)
Playback
Features
Take advantage of special functions possible with the recorder’s controls or the remote control.
Still
PAUSE DURING PLAYBACK
1 Press PAUSE. If there is vertical jitter, use the TV PROG. buttons to correct the picture.
●During still picture, the sound from the previous
3 seconds (approx.) will be played back repeatedly (provided there was at least 6 seconds of normal playback prior to engaging the still picture mode). However, the TIME SCAN indicator will not light.
●The TIME SCAN AUDIO switch must be set to "ON", or the sound will not be heard.
ACTIVATE FRAME-BY-FRAME PLAYBACK
2 Turn the JOG dial to the right for forward
OR
Press PAUSE.
OR
Press PUSH JOG % or %.
To resume normal playback, press PLAY.
Slow Motion
ACTIVATE SLOW-MOTION PLAYBACK
1 Turn the TIME SCAN SHUTTLE ring to the left or press PUSH JOG % during playback to decrease speed in the forward direction. To play in reverse
OR
During still picture, turn the TIME SCAN SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion.
OR
During still picture, press and hold PAUSE for 2 seconds, then release. Press and release again to return to still picture.
OR
During still picture, press and hold PUSH JOG % or %. Release to return to still picture.
To resume normal playback, press PLAY.
ACTIVATE HIGH-SPEED
SEARCH
1 During playback or still picture, press FF for forward
●For short searches, press and hold FF or REW for over 2 seconds. When released, normal playback resumes.
To resume normal playback, press PLAY.
NOTES:
●Picture may not appear during search with an
●In the search, still, or frame by frame playback mode, the picture may be distorted, and there may be a loss of colour.
