JVC HR-E939EG SET Input Mode, Reset the Counter, Locate Start Point, Locate END Point

34EN

EDITING(cont.)

Insert editing replaces part of the recorded scene with new

material. Both the picture and Hi-Fi audio soundtrack are

Insert Editing replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio

track as well, use the audio dubbing function simultaneously. Use your video recorder as the recorder.

Recorder Your recorder Source tape

		8
	TIME SCAN SHUTTLE
•• • • • •• •• • • • ••
• • • •	• • • •
	PAUSE	OGJ

Audio signal

Video signal

Another recorder

Player

	2
1	2	3
4	5	6
7	8	9
C.RESET	0
	NUMBER "0"

PAUSE

		Before insert editing			Normal audio
Recorded tape					track
			After insert editing
					Video/Hi-Fi
					audio track
1	MAKE CONNECTIONS
	Connect the player's VIDEO OUT and AUDIO OUT
	connectors to your recorder's VIDEO IN and AUDIO IN
	on the front panel.
2	SET INPUT MODE
	Press NUMBER key "0". "F-AU" appears in place of a
	channel number.
3	LOCATE END POINT
	Load the recording cassette into your recorder, and play
	it back to determine the edit-out point (the end of the
	segment to be replaced) using the JOG/TIME SCAN
	SHUTTLE controls or PUSH JOG			Þ%and PAUSE.
4	RESET THE COUNTER
	Press C.RESET to change the counter display to "0:00:00".
5	LOCATE START POINT
	Determine the edit-in point (the beginning of the
	segment to be replaced) using the JOG/TIME SCAN
	SHUTTLE controls or PUSH JOG			Þ%and PAUSE.
	● Be sure to engage the Still mode at the edit-in point.

3

1

PUSH JOG