JVC HR-E939EG specifications Engage RECORDER’S, Timer Mode, Access Showview Program Screen

EN25

SP/LP

				8	3
•• • • • ••		•• • • • ••
• •	• •	• •	• •

TIMER

TIMEADD 2

ACCESS SHOWVIEW PROGRAM SCREEN

Press OK, and the		– P1 –
ShowView Program screen	SHOWVIEW	12345678
appears (if you’re just	START	STOP
starting out, “P1” appears).	21 : 00	= 22 : 00
	SP		ON
● If the number you	DATE	TV PROG
entered is invalid,	25. 12	1
“ERROR” appears. Press	:OK		ARD
CANCEL and input a
valid ShowView number.

The front display panel looks like this:

SP

●If you are using the Illumi-Guide feature, OK blinks.

●If you’re not receiving PDC/VPS, press NUMBER key “7” to set to "OFF" (☞ pg. 28).

	1	2	3
	4	5	6
:PDC/VPS	7	8	9	WEEKLY
CANCEL		0		TIMER
		DAILY
SP/LP

3 OK

1

4	SET TAPE SPEED
	Press SP/LP to set the tape speed.
	RETURN TO NORMAL
5	SCREEN
	Press OK.
	● Repeat steps 1–5for each additional programme.
	ENGAGE RECORDER’S
6	TIMER MODE
	Press TIMER.

NOTE:

For safety, your recorder disables all other functions while in the Timer mode. If you want to use the recorder but its Timer mode is engaged, press TIMER and all other functions are operable.

To re-engage the timer, press TIMER.

To Delay The Stop Time . . .

. . . press ADD TIME (NUMBER Key "5") after pressing OK in step 3. Each time you press, the Stop time is delayed by 5 minutes (meaning that 5 minutes of recording time is added). You can easily compensate for anticipated programme schedule delays this way.

To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday).

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 28).