JVC HR-E939EG specifications ShowView Timer Recording, Enter Showview, EN Timer RECORDINGcont

24ENTIMERRECORDING(cont.)

ShowView

Timer

Recording

Before performing ShowView timer recording:

●Be sure to read "Information On ShowView" (☞ pg. 22).

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

			8
•• • • • ••		•• • • • ••
• •	• •	• •	• •

During ShowView and regular timer programming, the Illumi- Guide feature tells you which button on the remote control must be pressed next by lighting it up. To use this feature, press ILLUMI GUIDE before performing step 1. (PROG., REW, PLAY,

FFlight up at this time.)

If you aren't going to use the Illumi-Guide feature, go directly to step 1.

ACCESS TIMER PROGRAM- MING SCREEN

1	Press PROG.
	TIMER PROGRAMMING
	[0 – 9] : SHOWVIEW
	[+/-] : EXPRESS PROGRAMING
	[CANCEL] : EXIT

The front display panel looks like this:

●If you are using the Illumi-Guide feature, the following buttons will light up: NUMBER keys (0–9),START +/–,STOP +/–,DATE +/–,TV PROG. +/–, and CANCEL.

		2
	1	2
NUMBER	4	5
	7	8
CANCEL		0
START+/–
	–
	STOP+/

3

6

9

TV PROG.+/–

DATE+/

–

	ENTER SHOWVIEW
	NUMBER
	Press the NUMBER keys to	SHOWVIEW
	enter the ShowView	1 2 3 4 5 6 7 8 5
2 number of a programme
	you wish to record.
	● If you make a mistake,
	press CANCEL and then	[0 – 9] =
	input the correct number.

The ShowView number

you enter appears on the front display panel:

3 OK

PROG. 1

●If you are using the Illumi-Guide feature, OK blinks when the following buttons are lit: NUMBER keys (0– 9) and CANCEL.

ILLUMI GUIDE

When Using The Illumi-Guide Feature

●Buttons light or blink on the remote control for approximately 10 seconds. If the button or buttons extinguish during timer programming, press ILLUMI GUIDE and the button or buttons previously lit or blinking come back on. If the button or buttons do not re-light or start blinking again, press CANCEL and re-perform the timer programming procedure from the beginning.

●If for some reason the remote control's signal is not received by the video recorder, press CANCEL and re-perform the timer programming procedure from the beginning.