How do I deactivate the wake up timer temporarily?

You can deactivate the wake up timer temporarily by pressing the SNOOZE button on the remote. The system will switch to standby mode for five minutes, and then resume the last selected source.

Other Connection, Sleep timer setting, Timer Operations

Q: How do I set the sleep timer?

To set the sleep timer, press the SLEEP button repeatedly until it reaches the desired preset turn-off time. The system will then switch to standby mode at the preselected time.

Q: How can I listen to an external source on my Philips MC-500 stereo system?

To listen to an external source, use the red/white audio cables to connect the system's AUX/CDR IN R/L terminals to the AUDIO OUT terminals on the other audio/visual device. Then select the appropriate input source on the stereo system and press PLAY on the connected device.

Timer Operations	Other Connection

Temporarily deactivating the wake up timer

You are only able to activate the Snooze function within 30 minutes after the timer wake up from Standby mode.

1After timer wake up, press SNOOZE on the remote.

➜ The system will switch to standby mode for five minutes. After that, it resumes the timer last selected source again.

2To cancel the snooze function, press SNOOZE again.

Sleep timer setting

The sleep timer turns the system to standby mode at a preselected time.

1Press SLEEP repeatedly until it reaches the desired preset turn-off time.

➜The selections are as follows (time in minutes):

15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™ 15 …

➜SLEEP is shown, except for "OFF" mode.

➜To view or change the setting, repeat the above.

2Before the system switches to standby mode, a countdown of 10 seconds is displayed.

"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"

™"SLEEP"

To cancel the sleep timer

●Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON B button.

Listening to an external source

You can listen to the sound of the connected external device through your system’s speakers.

AUDIO OUT	1
L	1
L			R	L
				AUX/
R				CDR IN
R
				AC
				MAINS
	R	L		AM ANTENNA FM ANTENNA
		AUX/
		CDR IN
		+
		R
		–
		–
		L
		+
	SPEAKERS 6Ω
PLAY				AUX
				AUX
3
				2

1Use the red/white audio cables to connect the system’s AUX/CDR IN (R/L) terminals to the AUDIO OUT terminals on the other audio/visual device (such as a TV,VCR, Laser Disc player, DVD player or CD recorder)

➜ If the connecting device has only a a single audio out terminal, connect it to the AUX/CDR IN left terminal. Alternatively, you can use a “single to double” cinch cable, but the output sounds still remain monaural.

2Press AUX repeatedly.

➜Select “AUX” when connecting to a TV, VCR or Laser Disc player.

➜Select “AUX/CDR” when connecting to a CD recorder or DVD player.

3Press PLAY on the connected device to start playback.

Notes:

–All the sound control features (DSC, VEC for example) are available for selection.

–Always refer to the owner’s manual of the other equipment for complete connection and use details.

E n g l i s h

Philips MC-500 Other Connection, Sleep timer setting, Listening to an external source, Play

Models: MC-500