Basic Operations
E n g l i s h
Switching on/off
Switching to active mode
●Press CD, TUNER, AUX or
USB PC LINK.
Switching to standby mode (view clock)
●Press B.
➜ The clock is displayed.
Note:
–Before switching the system to standby mode, make sure the demonstration mode has been deactivated.
Demonstration mode
If the demonstration mode is active, whenever you switch the system to standby mode, it will begin showing the various features offered by the system.
To activate the demonstration
●In standby mode, press and hold Ç on the main unit until "DEMO ON" is displayed.
To deactivate the demonstration
●Press and hold Ç on the main unit until "DEMO OFF" is displayed.
Setting the clock
The clock can be set in either
4 (00:00 / 12:00AM)
3 (00:00 / 12:00AM)
2 (00:00 î12:00AM)
1, 5
1 Press and hold CLOCK on the remote until the time flashing on the display.
OR
Press and hold CLOCK•TIMER on the
main unit until "SELECT CLOCK OR TIMER" is displayed. Then press ë to change the display to “CLOCK” and press CLOCK•TIMER again to confirm.
2Press PROGRAM (PROG) repeatedly to change between
3Press à or á repeatedly to set the hour.
4Press í or ë repeatedly to set the minute.
5Press CLOCK (or CLOCK•TIMER) to store the setting.
➜ The clock will start working.
Notes:
–The clock setting will be erased when the system is disconnected from the power supply.
–The system will exit clock setting mode if no button is pressed within 90 seconds.
16