JVC HR-E939EG specifications Recording

16EN

RECORDING

Basic						TV signals being received by the recorder’s built-in tuner can be
						recorded onto a video tape. You can “capture” a TV programme
						using your video recorder.
Recording
							Insert a cassette with the record safety tab intact.
						1	LOAD A CASSETTE
							● The counter is reset to 0:00:00 and the recorder
							power comes on automatically.
		SP/LP		PLAY	TV PROG.		● If your recorder is connected to the TV via AV connec-
							tion, press TV/VIDEO to select the VIDEO mode.
			TOP/EJECT				CHOOSE A PROGRAMME
					8		Press TV PROG. +/– or the NUMBER keys to select the
							channel you wish to record. The name of the station
••• •• • •• ••• ••• ••	•	•• •••				2 appears in the recorder’s display panel for 5 seconds,
			RECORD				followed by the channel position number. (Only
							stations that appear in the Confirmation screen will be
							displayed.)

PAUSE ● The TV PROG. dial can also be used to select a channel.

					SET TAPE SPEED
					Press SP/LP. Check the SP/LP indicator on the recorder
				3 display panel to confirm the selected tape speed.
				4	START RECORDING
		2			Press and hold RECORD and PLAY on the remote
					control, or press RECORD on the recorder.
	1	2	3
NUMBER	4	5	6		B.E.S.T. takes place at the beginning of both the
					first SP and the first LP recording after inserting the
	7	8	9
					cassette (☞ pg. 17).
		TV/VIDEO
		0
			TV PROG.		PAUSE/RESUME
SP/LP				5	RECORDING
					Press PAUSE. Press PLAY to resume recording.
			PLAY
RECORD			PAUSE		STOP RECORDING
			3		Press STOP on the remote control or STOP/EJECT on
		STOP			the recorder. Then press STOP/EJECT to remove the
	1
				Accidental erasure prevention
				● To prevent accidental recording on a recorded cassette,
				remove its safety tab. To record on it later, cover the hole
				with adhesive tape.

Record safety tab