JVC HR-E939EG specifications Enter Channel Position, Engage RECORDER’S Timer Mode, Screen

SP/LP

			8
•• • • • ••		•• • • • ••
• •	• •	• •	• •

TIMER

		2		DAILY
	1	2
				3
	4	5		6
:PDC/VPS	7	8		9	WEEKLY
		0			TIMER
START+/–					TV PROG.+/–
				DATE+/
SP/LP		STOP+/–
					–
	1		3		OK

NOTES:

●To timer-record from a satellite tuner connected to your recorder's AV2 IN/DECODER connector, press TV PROG. +/– in step 6 above to set the channel position to "AUX2".

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 28).

							EN			27
	ENTER PROGRAMME STOP
4	TIME
	Press STOP +/– to enter the time you want recording to
	stop.
	● If you are using the Illumi-Guide feature, the following
	buttons remain lit: START +/–, STOP +/–, DATE +/–,
	and TV PROG. +/–.
5	ENTER PROGRAMME DATE
	Press DATE +/–. (The current date appears on screen.
	The date you enter appears in its place.)
	● If you are using the Illumi-Guide feature, the following
	buttons remain lit: START +/–, STOP +/–, DATE +/–,
	and TV PROG. +/–.
	ENTER CHANNEL
6	POSITION
	Press TV PROG. +/–.						– P1 –
	● If you’re not receiving					START	STOP
	PDC/VPS, press NUMBER					21 : 00	= 22 : 00
	key “7” to set			to		SP			ON
						DATE		TV PROG
	"OFF" (☞ pg. 28).
						25. 12	1
						[+/ –] =			ARD
		SP
			D		M
	● If you are using the Illumi-Guide feature, OK blinks
	when the following buttons are lit: START +/–, STOP
	+/–,DATE +/–, and TV PROG. +/–.
7	SET TAPE SPEED
	Press SP/LP to set the tape speed.
	RETURN TO NORMAL
8	SCREEN
	After confirming all information is correct, press OK
	and the normal screen appears.
	● Repeat steps 1–8for each additional programme.
	ENGAGE RECORDER’S
9	TIMER MODE
	Press TIMER.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday).