JVC HR-E939EG Access CH. SET Mode, Menu, Select Mode, Select Position, Input Channel, Information

38EN

USINGTHECONFIRMATIONSCREEN

Storing Channels Manually

Store channels that were not stored during Auto Channel Set.

Perform steps 1 and 2 of the previous procedure to access the Confirmation screen before continuing.

	ACCESS CH. SET MODE
1	MENU
	Press and hold CH SET for more than 2 seconds. The
	Language screen appears. Press OK. The Ch. Set Mode
	menu appears.
2	SELECT MODE
	Press PUSH JOG%Þ to select “MANUAL CH SET”,
	then press OK. The Confirmation screen appears.
3	SELECT POSITION
	Press PUSH JOG%Þ%%until an open position in
	which you want to store a channel begins blinking,
	then press OK. The Manual Ch. Set screen appears.
4	INPUT CHANNEL
	The number "01" appears blinking beneath "CH".
	Press the NUMBER keys to input the channel number
	you want to store.
	● For fine tuning adjustment, press PUSH JOG%until
	the item beneath "CH" begins blinking, then press
	PUSH JOG%Þ. While tuning, “F+” or “F–” appears.
	● If necessary, to change the band between CH(regular)
	and CC(cable), press PUSH JOGÞ%until CH or CC is
	blinking, then press PUSH JOG %Þ to select the
	band.
	● When storing a channel that sends scrambled
	broadcasts, press PUSH JOG%until "DECODER"
	blinks, then press PUSH JOG%Þ to set "DECODER"
	to "ON" ("OFF" is the default setting).
	ENTER NEW CHANNEL
5	INFORMATION
	Press OK or STORE, and the Confirmation screen
	appears.
	● Repeat steps 3 through 5 as necessary.
	CLOSE CONFIRMATION
6	SCREEN
	Press CH SET.
	● To input the station name, see page 39.
	● To change positions, see "Change Station Channel
	Position" (at right).

When Receiving A Scrambled Broadcast

Make sure that the AV2 SELECT switch is set to "DECODER" (☞ pg. 4).

1– Perform steps 1 and 2 above.

2– Press PUSH JOG%ÞÞ%to select the position of the channel broadcasting the scrambled programmes, then press OK three times.

3– Press PUSH JOG % until "DECODER" begins blinking, and set it to "ON" by pressing PUSH JOG%Þ.

4– Press OK to access the Confirmation screen.

●Repeat steps 2 – 4 for each additional channel. 5– Press CH SET.

Delete A Channel

SELECT ITEM

1 Press PUSH JOG%Þ% %until the item you want to delete begins blinking.

DELETE CHANNEL

2 Press CANCEL.

●The item directly beneath the cancelled one moves up one line.

●Repeat steps 1 and 2 as necessary.

CLOSE CONFIRMATION SCREEN

3 Press CH SET.

Change Station Channel Position

1	SELECT ITEM
	Press PUSH JOG%Þ%%until the item you want to
	move begins blinking. Then press OK and the station
	name (ID) and its channel (CH) number begin blinking.
2	SELECT NEW POSITION
	Press PUSH JOG%Þ%%to move the station to the new
	channel position, then press OK.
	Example: If you moved the station in position 3 to
	position 7, the stations originally in positions 4–7 each
	move up one space.
	● Repeat steps 1 and 2 as necessary.
	CLOSE CONFIRMATION
3	SCREEN
	Press CH SET.