Troubleshooting, Important Vibration Sound

Tilt handle at a 45º angle. Push and pull slowly across the floor to clean thoroughly.

When done, push ON/OFF button.

Place unit with Ultra-microfi- ber pad attached onto Floor Protector / Resting Mat. Allow to cool down for five (5) min.

When unit has cooled, remove Ultra-microfiber pad. Store unit upright in a dry area.

IMPORTANT: Vibration Sound

During use it’s normal to hear a “clicking” sound coming from the unit. This sound is produced by the water being pumped through the unit.

IMPORTANT

Always empty the water tank once you have finished using your Floor Sanitizer.

	Problem	Solution
	Unit not operating.	• Ensure plug is set firmly in outlet.
	Unit not operating.	• Replace fuse or reset breaker.
		• Replace fuse or reset breaker.

	Unit does not emit steam.	• Ensure water tank is filled with water.

	Water left on floor.	• Change the Ultra-microfiber pad.
	Water left on floor.	• Ensure unit is always level and parallel to the floor.
		• Ensure unit is always level and parallel to the floor.

	White spot left on floor.	• When cleaning do not leave unit in one spot for too long.
		• Use protector pad / floor mat when unit is ON and stationary.
		• Use distilled water instead of hard tap water.
		NOTE: To remove spot, use a damp cloth with a few drops of white vinegar
		to rub and remove stain.