Haan SI-25 instruction manual Using the Steam Function Operating Instructions

Page 10

Before Using Your Floor Sanitizer cont.

CAUTION

Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an ordinary extension cord.

IMPORTANT

This product is NOT for space heating purposes.

CAUTION

HAAN® floor care products emit steam at 212º to sanitize the area of use. This means that the steam head, Ultra-microfiber pads and carpet glide get very hot during use. Care should be taken when using this appliance and DO NOT touch components of this machine during use except in the approved manner as outlined in this manual.

Using the Steam Function - Operating Instructions

1

Assemble unit and place on Floor Protector / Resting Mat.

2

Press Water Tank Release but- ton and remove water tank.

3

Turn Cap counterclockwise to remove. Fill tank with water.

4

5

6

Tighten cap. Insert tank (cap down) until it “clicks”.

Press ON/OFF button. Wait 20 seconds for unit to heat up. Unit may vibrate while heating.

Gently place unit on Ultra- microfiber pad. You are now ready to steam clean.

8

Image 10
Contents Phone Haan CorporationPage Introduction Important Safety Instructions Save These InstructionsElectrical Plug Instructions Operating Instructions Care & MaintenanceHelpful Hints Ultra-Microfiber Pads for Haan Floor Sanitizing Steam Mop Product Assembly & Parts ClickBefore Using Your Floor Sanitizer Using the Steam Function Operating Instructions Troubleshooting Important Vibration SoundCommonly Asked Questions Couldn’t find the Answer to your Question?Haan Direct Or visitOne-Year Limited Warranty Product Specifications Model SI-25Product Registration Phone MailPlace Stamp Here