Harman-Kardon HKTS 15 owner manual Lit blue, whether or not an audio signal is present

Page 6

SUB-TS15 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS

place itself in the Standby mode, depending on whether it is receiving an audio signal. When this switch is placed in the ON position, the SUB-TS15 will remain on, whether or not it is receiving an audio signal.

An LED located on top of the SUB-TS15 indicates whether the SUB-TS15 is in the ON or STANDBY state when used with the Audio-Sense On/Off Switch ¢ in the AUTO position. The LED is lit blue to indi- cate that the SUB-TS15 is receiving an audio signal and is turned on, and the LED is lit amber to indicate that no signal is being received and the SUB-TS15 is in Standby mode.

When the Audio-Sense On/Off Switch ¢ is in the ON position, the LED will be

lit blue, whether or not an audio signal is present.

When the Master Power Switch ‚ is turned off, the LED goes dark, no matter which position the Audio-Sense On/Off Switch ¢ is in.

∞Phase Switch: This switch determines whether the SUB-TS15 subwoofer’s piston- like action moves in and out in phase with the main speakers. If the speakers were to play out of phase, the sound waves pro- duced by the subwoofer would be cancelled out, reducing bass response. This phenome- non depends in part on the relative place- ment of the speakers in the room. In most cases, the Phase Switch ∞ should be left in the NORMAL position. However, it does no harm to experiment with the Phase Switch ∞, and you may leave it in the position that maximizes bass response.

§Line-Level Subwoofer (SUB) Input: Connect the subwoofer output of a receiver with digital surround sound decoding, such as Dolby® Digital or DTS,® to this input. This input bypasses the SUB-TS15’s internal crossover circuitry, and should only be used with a filtered signal. If your receiver does not have digital decoding, you should use the Line-Level Full-Range Inputs ¶ instead.

Line-Level Full-Range Inputs: Connect the line-level subwoofer output or preamp out- put(s) of your receiver or amplifier to these inputs. If your receiver does not have a sepa- rate subwoofer output, use a Y-adapter (not supplied) to bridge the receiver’s preamp out- put to the main amp input for that channel, and connect the long end of the adapter

to the corresponding line-level input on the SUB-TS15. If your receiver has only a single subwoofer output, you may connect it to either the left or right line-level input on the SUB-TS15, and no Y-adapter is needed.

•Speaker-Level Outputs: If you are using the Speaker-Level Inputs ª on the SUB-TS15, you should connect these bind- ing-post terminals to your front left and right speakers, remembering to maintain polarity by connecting the (+) terminal on the SUB- TS15 subwoofer to the (+) terminal on the speaker, and the (–) terminal on the SUB- TS15 subwoofer to the (–) terminal on the speaker. If you are not using the Speaker- Level Inputs ª, then connect your front left and right speakers directly to your receiver or amplifier. See pages 9 through 12 for further information on speaker connections.

ªSpeaker-Level Inputs: If your receiver or amplifier does not have a line-level sub- woofer output, connect these binding-post terminals to the main left and right speaker terminals of your receiver or amplifier. Remember to maintain polarity by connecting the (+) terminal on the receiver/amplifier to the

(+) terminal on the SUB-TS15 subwoofer, and the (–) terminal on the receiver/amplifier to the

(–) terminal on the SUB-TS15 subwoofer.

‚Master Power Switch: Place this switch in the “•” position to power-on the SUB-TS15 subwoofer. The SUB-TS15 will then be either in the Standby mode or com- pletely on, depending on the position of the Audio-Sense On/Off Switch ¢.

⁄AC Power Cord: Make sure to plug this cord into an active, unswitched electrical out- let for proper operation of the SUB-TS15.

The cord should not be plugged into the accessory outlets found on some audio components.

6 SUB-TS15 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Hkts Hkts 15 Home Theater Speaker System Safety Information When replacement parts are required, beAuto turn-on using trigger input or audio-sense IntroductionComplete home theater speaker system ¡ Subwoofer-Level Control ¢ Audio-Sense On/Off Switch∞ Phase Switch Speaker-Level OutputsLit blue, whether or not an audio signal is present Terminal on the SUB-TS15 subwooferPosition Speaker PlacementSpeaker GrayMounting Options Mounting screwsSpeaker Connections Speaker-Level Connection GuideLeft Use the line-level input jack marked SUBDolby Pro Logic Non-Digital Line Level SUB-TS15 High-Cut Low-Pass Filter Switch OperationTroubleshooting Weight 69 lb/1.21kg Hkts 15 SpecificationsWeight 65 lb/0.74kg Weight 35.11 lb/15.8kgPart No -000-05503-E Printed 8/06

HKTS 15 specifications

The Harman-Kardon HKTS 15 is a compact 5.1-channel home theater speaker system designed to deliver premium audio performance in a sleek package. Impeccably stylish and visually appealing, the HKTS 15 seamlessly blends into various home decor styles while providing an immersive sound experience that elevates movie nights and music listening alike.

One of the standout features of the HKTS 15 is its 5.1 speaker configuration, which includes four satellite speakers, a dedicated center channel speaker, and a powerful subwoofer. The satellite speakers are engineered to produce clear and precise high and mid-range frequencies, making dialogue crisp and music rich. The center channel speaker enhances the overall audio experience with dialogue intelligibility, ensuring that important sound details are never missed during films or TV shows. Meanwhile, the subwoofer, with its robust bass, adds depth to explosions and music beats, creating a fuller soundstage.

Harman-Kardon has equipped the HKTS 15 with advanced technologies to ensure superior sound performance. The use of sophisticated driver materials and sophisticated crossover networks enables the speakers to produce balanced audio across different frequency ranges. The satellite speakers employ a ¾-inch titanium-laminate dome tweeter for enhanced treble clarity, while the 4-inch woofers are designed for solid mid-range reproduction. This combination ensures that every sound is rendered beautifully, from subtle whispers to booming action sequences.

Another notable characteristic of the HKTS 15 is its ability to integrate with various audio receivers. The system is compatible with most home theater receivers, making it easy to set up and connect to existing audio equipment. Its compact design ensures that it can fit comfortably in smaller living spaces, while the included wall-mount brackets provide flexibility in installations.

The HKTS 15 includes an audio cable and speaker wire, making it easy for users to get started with their home theater setup right away. Additionally, the stylish yet durable construction of the speakers and subwoofer ensures long-lasting performance and reliability.

In conclusion, the Harman-Kardon HKTS 15 stands out as a capable and stylish home theater speaker system. With its 5.1-channel configuration, advanced audio technologies, and elegant design, it provides an exceptional listening experience for anyone looking to enhance their audiovisual setup. Whether for movies, music, or gaming, the HKTS 15 delivers on all fronts, making it an excellent choice for home entertainment enthusiasts.
Top Page Image Contents