Haan SI-75 instruction manual Using the Carpet Glide, Important Vibration Sound

7

Tilt handle at a 45º angle. Push and pull slowly across the floor to clean thoroughly.

10

8

When done, push ON/OFF button.

9

Place unit with Ultra-microfi- ber pad attached onto Floor Protector / Resting Mat. Allow to cool down for five (5) min.

When unit has cooled, remove Ultra-microfiber pad. Store unit upright in a dry area.

IMPORTANT: Vibration Sound

During use it’s normal to hear a “clicking” sound coming from the unit. This sound is produced by the water being pumped through the unit.

IMPORTANT

Always empty the water tank once you have finished using your Floor Sanitizer.

Using the Carpet Glide

What is the Carpet Glide?

The carpet glide enables the Floor Sanitizer to freshen, deodorize and sanitize carpet- ing, rugs, upholstery, pet cushions and more. Used with the Floor Sanitizer it kills dust mites and other allergens on a variety of surfaces.

NOTE: The Carpet Glide is used WITHOUT the Ultra-Microfiber Pad.

To Remove

1

TAB

TAB

2

3Carpet Glide

“Hands Free”

Removal Tab

Attach carpet glide by placing unit under “tabs” and gently pushing down into place.

With carpet glide attached, place on Floor Protector / Resting Mat. Turn unit ON and follow operat- ing instructions to clean.

Turn unit OFF, let cool. Use foot on “Hands Free” tab to remove Tray from steam head.

9