Operating Instructions, Care & Maintenance

Operating Instructions

Care & Maintenance

IMPORTANT

Always ensure that your floor sanitizer is UNPLUGGED from the wall receptacle prior to cleaning or emptying the water tank.

CAUTION

Do not immerse your floor sanitizer in water or any other liquid.

1.Turn your floor sanitizer off and unplug from the electrical outlet.

2.Wrap power cord around cord hangers.

3.Let your floor sanitizer cool for five (5) minutes before removing the ultra-microfiber pad and before emptying the water tank.

4.Always empty the water tank when you have finished using your floor sanitizer.

5.Never leave ultra-microfiber pad on floor sanitizer when you have finished using it. Always remove the ultra-microfiber pad and wash in warm water with a mild detergent. Never use bleach or fabric softener when cleaning the ultra-microfiber pad.

The ultra-microfiber pad can be washed in a washing machine and dried in a clothes dryer but on low heat.

To decrease pad wear, we recommend the pad be hung to dry for 24 hours.

6.Wipe your floor sanitizer with a damp cloth to clean. Never immerse the sanitizer in water or any other liquid.

7.In order to keep your floor sanitizer in good condition, we recommend that you clean the water tank once a month to eliminate calcium deposits. Add eight ounces (8 oz) of water to the water tank and insert 1 packet of Fresh Rinse™ Lime and Scale Remover. Shake to loosen any deposits. Place unit on resting mat without pad, turn unit on and allow water to steam until water in tank is depleted. Do not use vinegar or other decalcifying substances in the floor sanitizer

water tank.

Helpful Hints

1. Always use a vacuum or sweep before sanitizing your floors.

2. The easiest way to use the machine is to tilt the handle to a 45º angle and clean

slowly 2-3 yards at a time.