Haan HS-20 user manual Using Your Steam Cleaner, Filling the Water Tank, Attaching the Accessories

!CAUTION

After each use, unplug the power cord and press the steam button to fully discharge all remaining air. Make sure that no steam remains before opening the safety cap.

Fig 1a

Fig 2

Fig 3

Fig 4

Operating Instructions:

When using this product, first perform steps 1-7 with the power cord unplugged. If using for the first time, fill with and discard water once. An odor may be emitted when first used.

Filling the Water Tank:

1)Press down firmly on the safety cap until you hear a clicking sound; immediately turn it counter-clockwise to remove cap. (Fig 1) Be sure that the ‘Continuous Steam Lock’ is in the unlock position. (Fig 2)

NOTE: After each use, completely empty any remaining water from the internal tank. Water can be drained by turning the product upsidedown.

2)Fill the measuring cup with water. Optimum capacity: 200ml. Use the funnel to fill the internal tank with water. Use only one measuring cup of water per single use. Be careful not to overflow the container. (Fig 3)

3)Turn the safety cap clockwise to close. The cap will continue to turn even when closed properly. During product operation, the safety cap does not open due to the internal pressure. It can be opened only when the internal pressure of the product and/or the water temperature is low.

Attaching the Accessories:

Concentrator Nozzle, Extension Hose or

Garment/Surface Attachment:

4)When attaching the Concentrator Nozzle, Extension Hose or Garment/Surface Attachment, align the indicator line (—) on the connection section of the accessory with the indicator line (—) on the main unit. (Fig 4) Push the accessory onto the steam nozzle of the main unit and turn in a