HydroSurge 400A-60 warranty Serial Number 0604 to Mmyy Safety Information

Page 2

The Specialist In Drum Handling Equipment

MODEL 400A-60

Hydra-Lift, 60”, Manual Lift, Manual Tilt

Operator’s Manual for Morse Hydra-Lift Drum Karrier Model 400A-60

Serial Number 0604 to ____ (MMYY)

Safety Information (continued)

DANGER - Indicates a situation which, if not avoided, will result in serious injury or death. This signal word is limited to the most extreme situations.

WARNING - Indicates a situation which, if not avoided, could result in serious injury or death.

CAUTION - Indicates a situation which, if not avoided, can result in damage to the machine.

CAUTION – Do Not Transport with Drum Raised

ALWAYS LOWER THE DRUM HOLDER TO LOWEST POSITION BEFORE TRANSPORTING. The unit can become unstable when transporting with a raised load.

DANGER - Stay Clear of Power Lines

KEEP WELL CLEAR OF POWER LINES. Never approach a power line. Current in a high voltage line may arc some distance from the wire to the steel framed, grounded machine.

WARNING

The Hydra-Lift Karrier is designed to handle one drum of the types listed at the top of page 3, under 2. Machine Description. DO NOT attempt to handle any other type of drum or object. DO NOT exceed the weight capacity of 800 Lb.

WARNING - Level Floors Only

For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, ramps, irregular or debris strewn floors.

WARNING - Do Not Modify the Unit

Under no circumstances should any modifications be made to the Morse machinery without factory authorization. Any modifications may void the warranty. This machine was designed to perform a specific job and alterations may result in injury to operator or machine.

WARNING - No Loose Fitting Clothing

Wear close-fitting clothing and safety equipment appropriate to the job. Loose fitting clothing may become caught on the machinery and cause severe personal injury.

WARNING - Hydraulic Fluid Under Pressure Can Be Hazardous

Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury. Avoid the hazard by relieving pressure before disconnecting hydraulic lines. Keep hands and body away from pinholes and nozzles, which eject fluid under high pressure. Use a piece of cardboard to search for leaks. If an accident occurs, see a doctor immediately and inform them of the nature of the accident.

CAUTION - Wear Safety Shoes

Wear safety shoes with non-slip soles and hard toe protection.

Copyright 2007 - Morse Mfg. Co., Inc.

Form PL400-60 (0604-____) (Updated 10/2007)

Page 2

Image 2
Contents Limited 2 Year Warranty ContentsReceiving Procedures Safety InformationSerial Number 0604 to Mmyy Safety Information Lift and Lower Function Serial Number 0604 to Mmyy Machine DescriptionControls Tilt Function To tilt the drumDrum Holder Assembly Floor LockPlease unpack and identify the following parts Serial Number 0604 to Mmyy Operating Instructions Attaching the drumSerial Number 0604 to Mmyy Maintenance Recommended spare parts Model 400A-60 Ratchet Hinge Plate CPT 1/4 Model 400A-60