Harman-Kardon AVR 230 owner manual To adjust the output level, press the ⁄/¤ Buttons

Page 23

SYSTEM CONFIGURATION

correct channel from which the test noise should be heard will be shown in the lower third of the video screen and in the Lower Display Line ¯. While the test noise is circulating, the proper channel position will also be indicated in the Speaker/Channel Input Indicators ˆ by a blinking letter within the correct channel.

To adjust the output level, press the ⁄/¤ Buttons

nuntil the desired level is shown in the display or on-screen. Once the buttons are released, the test noise will begin to circulate again in five seconds.

When all channels have the same output level, press the Test Button i again to complete the process.

NOTE: Output level adjustment is not available for the

VMAx or Surround Off modes.

Additional Input Adjustments

After one input has been adjusted for Surround mode, digital input (if any), speaker type, and output levels, go back to the INPUT SETUP line on the MASTER MENU (Figure 1) and enter the set- tings for each input that you will use. In most cases, only the digital input and surround mode will be differ- ent from one input to the next, while the speaker type, crossover frequency, Night mode and output level settings will usually be the same and may be quickly entered by entering the same data used for the original input.

When all settings and adjustments have been made, press the OSD Button v to return to normal oper- ation of the AVR.

Once the settings outlined on the previous pages have been made, the AVR 230 is ready for operation. While there are some additional settings to be made, these are best done after you have had an opportunity to lis- ten to a variety of sources and different kinds of pro- gram material. These advanced settings are described on pages 30 and 31 of this manual. In addition, any of the settings made in the initial configuration of the unit may be changed at any time. As you add new or different sources or speakers, or if you wish to change a setting to better reflect your listening taste, simply follow the instructions for changing the settings for that parameter as shown in this section.

Having completed the setup and configuration process for your AVR 230, you are about to experience the finest in music and home theater listening. Enjoy!

SYSTEM CONFIGURATION 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents AUDIO/VIDEO Receiver AVRAVR 230 AUDIO/VIDEO Receiver Table of ContentsIntroduction Important Safety Information Safety Information@ Set Button Input IndicatorsFRONT-PANEL Controls Tuner Band Selector# Digital Input Selector Press this button to REAR-PANEL Connections REAR-PANEL Connections REAR-PANEL Connections Main Remote Control Functions OFF SPL Selector This button activates Spare Button This button has no direct function for the AVRSystem Installation Installation and ConnectionsVideo Equipment Connections System and Power ConnectionsRemote Control Extension AC Power ConnectionsSpeaker Selection and Placement System ConfigurationSpeaker Placement System SetupSetting the System Configuration Memory Using the On-Screen DisplayMaking Configuration Adjustments Surround Setup Input SetupPress the Set Button p to return to Speaker SetupD E Delay Settings Important Notes Output Level AdjustmentUsing EzSet Master Menu Manual Output Level AdjustmentConnected to the correct output terminal VMAx or Surround Off modes Additional Input Adjustments To adjust the output level, press the ⁄/¤ ButtonsBasic Operation Volume ControlSurround Mode Selection OperationSelecting a Digital Source Digital Audio PlaybackDolby Digital DTSMode Features Surround Mode ChartPCM Playback Indications Surround Mode TypesSpeaker/Channel Indicators Digital Bitstream IndicationsRange OFF Tuner OperationTape Recording Output Level Trim AdjustmentAs this will alter the reference setting Memory BackupAdvanced Features At the Advanced Select menu Figure If you wish to make other adjustments, pressDVD CD Programming the RemoteProgramming the Remote Macro ProgrammingProgrammed Device Functions Press the Mute Button 42 to store the TV Power On CommandReassigning Device Control Selectors Volume Punch-ThroughChannel Control Punch-Through Transport Control Punch-ThroughPress the 3 Button r three times Resetting the Remote MemoryFunction List OSD FAVSetup Code Table TV Logik Teknika Setup Code Table VCR Sanyo SaloraSamsung SansuiSetup Code Table CD Setup Code Table DVD Setup Code Table SAT Setup Code Table CBL Setup Code Table TapeSprucer RembrantSeam SignatureSymptom Cause Solution Troubleshooting GuideProcessor Reset Ntsc AVR 230 Technical SpecificationsPage

AVR 230 specifications

The Harman-Kardon AVR 230 is a versatile and well-regarded audio-video receiver that caters to both music enthusiasts and home theater aficionados. Launched as one of the models in Harman-Kardon's reputable lineup of receivers, the AVR 230 combines advanced technology with user-friendly features, making it a wise choice for both novice and experienced users.

One of the standout features of the AVR 230 is its impressive audio quality. With a power output of 70 Watts per channel across seven channels, the receiver is capable of delivering immersive sound that brings movies and music to life. The device supports various surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II, allowing users to enjoy a rich audio experience tailored to their media. The built-in 7.1-channel surround sound capability ensures that users have the flexibility to connect multiple speakers for an enveloping soundstage.

The AVR 230 also embraces modern connectivity options, featuring multiple HDMI inputs, which are essential for connecting to high-definition devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI passthrough capability allows users to maintain high-quality video signals without sacrificing audio performance. Additionally, the receiver includes composite and component video inputs, along with traditional analog connections, affording users ample options for source integration.

One of the key technologies present in the AVR 230 is the Adaptive Sound Control feature. This intelligent function analyzes the audio content being played and automatically adjusts the sound settings to optimize the listening experience. Whether the user is watching an action-packed blockbuster or listening to a quiet dialogue, the AVR 230 ensures clarity and balance across the audio spectrum.

Ease of use is another hallmark of the AVR 230. The user-friendly interface, combined with an intuitive remote control, makes navigating settings and inputs a breeze. The on-screen display presents a clear overview of settings, helping users adjust configurations without fuss.

Furthermore, the build quality of the Harman-Kardon AVR 230 is noteworthy, featuring a sleek design that integrates seamlessly into any home theater setup. The receiver's sturdy construction not only enhances durability but also contributes to its aesthetic appeal.

In conclusion, the Harman-Kardon AVR 230 combines performance, versatility, and ease of use, making it a compelling choice for anyone looking to enhance their home audio-visual experience. With its blend of powerful audio capabilities, modern connectivity options, and user-friendly features, the AVR 230 remains a worthy contender in the realm of audio-video receivers.
Top Page Image Contents