Harman-Kardon AVR 230 owner manual REAR-PANEL Connections

Page 8

REAR-PANEL CONNECTIONS

•Subwoofer Output: Connect this jack to the line- level input of a powered subwoofer. If an external sub- woofer amplifier is used, connect this jack to the sub- woofer amplifier input.

ªFront Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right speakers. When making speaker connections always make certain to maintain correct polarity by connecting the color-coded (white for front left and red for front right) (+) terminals on the AVR 230 to the red (+) terminals on the speakers and the black (–) terminals on the AVR 230 to the black (–) terminals on the speakers. See page 13 for more information on speaker polarity.

‚Surround Back Speaker Outputs: These speaker terminals are normally used to power the sur- round back speaker in a 6.1-channel system.

⁄Surround Speaker Outputs: Connect these out- puts to the matching + and – terminals on your sur- round channel speakers. In conformance with the CEA color-code specification, the blue terminal is the posi- tive, or “+,” terminal that should be connected to the red (+) terminal on the Surround Left speaker with older color-coding, while the gray terminal should be connected to the red (+) terminal on the Surround Right speaker with the older color-coding. Connect the black (–) terminal on the AVR to the matching black negative (–) terminals for each surround speaker. (See page 13 for more information on speaker polarity.)

¤Center Speaker Outputs: Connect these outputs to the matching + and – terminals on your center channel speaker. In conformance with the CEA color-code specification, the green terminal is the positive, or “+,” terminal that should be connected to the red (+) terminal on speakers with the older color- coding. Connect the black (–) terminal on the AVR to the black (–) terminal on your speaker. (See page 13 for more information on speaker polarity.)

‹Video 2 Component Video Inputs: Connect the Y/Pr/Pb component video outputs of an HDTV set-top converter, satellite receiver or other video source device with component video outputs to these jacks.

›DVD Component Video Inputs: Connect the Y/Pr/Pb component video outputs of a DVD player to these jacks.

fiComponent Video Monitor Outputs: Connect these outputs to the component video inputs of a video projector or monitor. When a source connected to one of the Component Video Inputs ‹› is selected, the signal will be sent to these jacks.

flAC Power Cord: Connect the AC power cord to a non-switched AC wall outlet.

‡Switched AC Accessory Outlet: These outlets may be used to power any device you wish to have turned on when the AVR 230 is turned on.

°Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR 230 is on or off.

NOTE: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts.

·Optical Digital Audio Output: Connect this jack to the optical digital input connector on a CD-R/RW, MiniDisc or other digital recorder.

aCoaxial Digital Audio Output: Connect this jack to the coaxial digital input of a CD-R/RW, MiniDisc or other digital recorder.

bS-Video Monitor Output: If any of the input sources used in your system have S-Video connec- tions to the AVR, connect this jack to the S-Video input on your television, projector or other video display.

cCoaxial Digital Audio Inputs: Connect the coax digital output from a DVD player, HDTV receiver, LD player or CD player to these jacks. The signal may be a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to these jacks.

dDVD S-Video Input: Connect the S-Video output of a DVD player or other video source to this jack.

eVideo 1 S-Video Input: If the product connected to the Video 1 Audio Inputs 33 has S-Video capability, connect this jack to the PLAY/OUT S-Video jack on that unit and then make certain that the S-Video Monitor Output b is connected as described above.

fOptical Digital Audio Inputs: Connect the optical digital output from a DVD player, HDTV receiver, LD player or CD player to these jacks. The signal may be a Dolby Digital signal, a DTS signal or a standard PCM digital source.

gVideo 1 S-Video Output: If the product connected to the Video 1 Audio/Video Outputs 34 has S-Video capability, connect this jack to the REC/IN S-Video jack on that unit.

hVideo 2 S-Video Input: If the product connected to the Video 2 Audio/Video Inputs 35 has S-Video capability, connect this jack to the PLAY/OUT S-Video jack on that unit and then make certain that the S-Video Monitor Output b is connected as described above.

iVideo 2 S-Video Output: If the product con- nected to the Video 2 Audio/Video Outputs 36 has S-Video capability, connect this jack to the REC/IN S-Video jack on that unit.

j6/8-Channel Direct Inputs: These jacks are used for connection to source devices such as DVD- Audio or SACD players with discrete analog outputs. Depending on the source device in use, all eight jacks may be used, though in many cases only connections to the front left/right, center, surround left/right and LFE (subwoofer input) jacks will be used for standard 5.1 audio signals.

kVideo 3 S-Video Input: If the product connected to the Video 3 Audio/Video Inputs 37 has S-Video capability, connect this jack to the PLAY/OUT S-Video jack on that unit and then make certain that the S-Video Monitor Output b is connected as described above.

31Video Monitor Output: Connect this jack to the composite video input of a TV monitor or video projec- tor to view the on-screen menus and the output of a standard video source.

32DVD Audio/Video Inputs: Connect the composite video and L/R analog audio outputs of a DVD player or other video source to these jacks.

33Video 1 Audio/Video Inputs: Connect the com- posite or Video and L/R analog audio PLAY/OUT jacks of a VCR or other video source to these jacks.

34Video 1 Audio/Video Outputs: Connect the composite or Video and L/R analog audio REC/IN jacks of a VCR or other video recording device such as a DVD recorder or PVR to these jacks.

35Video 2 Audio/Video Inputs: Connect the com- posite or Video and L/R analog audio PLAY/OUT jacks of a VCR or other video source to these jacks.

8 REAR-PANEL CONNECTIONS

Page 7 Page 9
Image 8
Page 7 Page 9
Contents AVR AUDIO/VIDEO ReceiverTable of Contents AVR 230 AUDIO/VIDEO ReceiverIntroduction Safety Information Important Safety InformationInput Indicators FRONT-PANEL ControlsTuner Band Selector @ Set Button# Digital Input Selector Press this button to REAR-PANEL Connections REAR-PANEL Connections REAR-PANEL Connections Main Remote Control Functions OFF Spare Button This button has no direct function for the AVR SPL Selector This button activatesInstallation and Connections System InstallationSystem and Power Connections Remote Control ExtensionAC Power Connections Video Equipment ConnectionsSystem Configuration Speaker PlacementSystem Setup Speaker Selection and PlacementSetting the System Configuration Memory Using the On-Screen DisplayMaking Configuration Adjustments Input Setup Surround SetupSpeaker Setup Press the Set Button p to return toD E Delay Settings Important Notes Output Level AdjustmentUsing EzSet Master Menu Manual Output Level AdjustmentConnected to the correct output terminal To adjust the output level, press the ⁄/¤ Buttons VMAx or Surround Off modes Additional Input AdjustmentsVolume Control Surround Mode SelectionOperation Basic OperationDigital Audio Playback Dolby DigitalDTS Selecting a Digital SourceSurround Mode Chart Mode FeaturesSurround Mode Types Speaker/Channel IndicatorsDigital Bitstream Indications PCM Playback IndicationsTuner Operation Range OFFOutput Level Trim Adjustment As this will alter the reference settingMemory Backup Tape RecordingAdvanced Features If you wish to make other adjustments, press At the Advanced Select menu FigureProgramming the Remote Programming the RemoteMacro Programming DVD CDPress the Mute Button 42 to store the TV Power On Command Programmed Device FunctionsVolume Punch-Through Channel Control Punch-ThroughTransport Control Punch-Through Reassigning Device Control SelectorsResetting the Remote Memory Press the 3 Button r three timesFunction List FAV OSDSetup Code Table TV Logik Teknika Setup Code Table VCR Salora SamsungSansui SanyoSetup Code Table CD Setup Code Table DVD Setup Code Table SAT Setup Code Table Tape Setup Code Table CBLRembrant SeamSignature SprucerSymptom Cause Solution Troubleshooting GuideProcessor Reset AVR 230 Technical Specifications NtscPage

AVR 230 specifications

The Harman-Kardon AVR 230 is a versatile and well-regarded audio-video receiver that caters to both music enthusiasts and home theater aficionados. Launched as one of the models in Harman-Kardon's reputable lineup of receivers, the AVR 230 combines advanced technology with user-friendly features, making it a wise choice for both novice and experienced users.

One of the standout features of the AVR 230 is its impressive audio quality. With a power output of 70 Watts per channel across seven channels, the receiver is capable of delivering immersive sound that brings movies and music to life. The device supports various surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II, allowing users to enjoy a rich audio experience tailored to their media. The built-in 7.1-channel surround sound capability ensures that users have the flexibility to connect multiple speakers for an enveloping soundstage.

The AVR 230 also embraces modern connectivity options, featuring multiple HDMI inputs, which are essential for connecting to high-definition devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI passthrough capability allows users to maintain high-quality video signals without sacrificing audio performance. Additionally, the receiver includes composite and component video inputs, along with traditional analog connections, affording users ample options for source integration.

One of the key technologies present in the AVR 230 is the Adaptive Sound Control feature. This intelligent function analyzes the audio content being played and automatically adjusts the sound settings to optimize the listening experience. Whether the user is watching an action-packed blockbuster or listening to a quiet dialogue, the AVR 230 ensures clarity and balance across the audio spectrum.

Ease of use is another hallmark of the AVR 230. The user-friendly interface, combined with an intuitive remote control, makes navigating settings and inputs a breeze. The on-screen display presents a clear overview of settings, helping users adjust configurations without fuss.

Furthermore, the build quality of the Harman-Kardon AVR 230 is noteworthy, featuring a sleek design that integrates seamlessly into any home theater setup. The receiver's sturdy construction not only enhances durability but also contributes to its aesthetic appeal.

In conclusion, the Harman-Kardon AVR 230 combines performance, versatility, and ease of use, making it a compelling choice for anyone looking to enhance their home audio-visual experience. With its blend of powerful audio capabilities, modern connectivity options, and user-friendly features, the AVR 230 remains a worthy contender in the realm of audio-video receivers.
Top Page Image Contents