GE JG966 Instructions, Care and Cleaning, Troubleshooting Tips, Oven Light Replacement, Safety

Models: JG966 JD966 JSP36

1 40
Download 40 pages 56.11 Kb
Page 29
Image 29
Oven Light Replacement

www.GEAppliances.com

Oven Light Replacement

Safety

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

To remove the cover:

To replace the cover:

Line up tabs of lens in front of tabs on housing and rotate clockwise to engage.

Connect electrical power to the range.

Instructions

Twist lens counterclockwise about a quarter turn to remove.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt appliance bulb.

Operating Instructions

Do not store a soiled broiler pan and grid anywhere in the range.

Broiler Pan & Grid

Do not clean the broiler pan or grid in a self- cleaning oven.

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a dishwasher.

Care and Cleaning

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rail

Stop guide

 

 

 

 

Storage Drawer Removal

To remove the drawer:

Pull the drawer out until it stops.

Lift the front of the drawer until the stops clear the guides.

Remove the drawer.

To replace the drawer:

Place the drawer rails on the guides.

Push the drawer back until it stops.

Lift the front of the drawer and push back until the stops clear the guides.

Lower the front of the drawer and push back until it closes.

Troubleshooting Tips

Oven Heating Elements

Do not clean the broil element. Any soil will burn off when the element is heated. To clean the oven floor, gently lift the bake element. Clean with warm, soapy water.

On some models, the bake element is not exposed and is under the oven floor. If spillovers, residue or ash accumulate on the oven floor, wipe up before self-cleaning.

Consumer Support

29

Page 29
Image 29
GE JG966, JSP36 Instructions, Care and Cleaning, Troubleshooting Tips, Oven Light Replacement, Broiler Pan & Grid, Safety