Care and cleaning of the range. | www.GEAppliances.com |
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the
Safety Instructions
How to Remove Packaging Tape
To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape and cooktop labels on new appliances is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.
Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.
NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.
Operating
Control Knobs
The control knobs may be removed for easier cleaning.Before removing the knobs for cleaning, please note that the knobs are in the OFF position. When replacing the knobs,
check the OFF position to insure proper placement.
Wash the knobs in soap and water or a vinegar and hot water solution but do not soak.
Instructions Care
Oven Vent
The oven vent is above the left side of the door. | It is normal for steam to come out of | |
This area could become hot during | the vent. | |
The vent is important for proper air circulation. | ||
oven use. | ||
| Never block this vent. |
and Cleaning
Control Panel
Deactivate the touch pads before cleaning.
See the
Clean up splatters with a damp cloth.
You may also use a glass cleaner.
Remove heavier soil with warm soapy water. Do not use abrasives of any kind.
Reactivate the touch pads after cleaning.See the
manual.
Troubleshooting Tips Consumer Support
27
