Harman-Kardon HKTS 11 owner manual Front, Left, Out

Page 9

Speaker Connections

Dolby Digital or DTS®

(or Other Digital Surround Mode) Connection

Use this installation method for Dolby Digital, DTS® or other digital surround processors:

Use the line-level input jack marked "SUB" for the Low-Frequency Effects channel. Connect this

jack to the LFE output or subwoofer output on your receiver or amplifier. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

Make sure that you have configured your surround-sound processor for “Subwoofer On.” The front left, front right, center and rear speakers should all be set to “Small.”

Front

Left

–+

Center

–+

SUB-TS11 Subwoofer

LINE LEVEL IN

SUB R L

Front Right

–+

Surround

Left

–+

Front

 

Front

Left

 

Right

 

SUB/LFE

 

 

Out

 

Surround

 

Surround

Left

Center

Right

Receiver

Surround

Right

–+

SPEAKER CONNECTIONS 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Hkts 11 Home Theater Speaker System Declaration of Conformity Table of ContentsIntroduction Description and FeaturesIntroduction IncludedEffect when the Sub Input Subwoofer-Level Control VolumePhase Switch This switch determines Rear Panel ConnectionsInstead Speaker Placement Wall-Mounting Mounting Options+ terminal and black for the terminal Speaker ConnectionsFront LeftOut Important Do not use the Sub Input on Dolby Pro Logic Non-Digital Line LevelCenter Dolby* Pro Logic* Non-Digital Speaker LevelReceiver Front Left CenterAdditional Bass Adjustments VolumeWhen the Sub Input OperationIf there is no sound from the center speaker TroubleshootingIf there is low or no bass output If there is no sound from the surround speakersSensitivity Dimensions H x W x D 86dB @ 1 Watt/1 meter SpecificationsSystem SatellitesHarman Consumer International
Top Page Image Contents