GE GNSF23Z01, GNSF35Z01, GNSF18Z01 owner manual About the water softener system

Page 5

About the water softener system.

Soft water

Hard water

OUT

IN

Salt storage

 

tank (salt

 

not shown)

 

 

Resin

 

tank

Brine

Resin

bed

valve

 

A video describing important use and care instructions has been included with the product for your use.

Service

When the water softening system is providing soft water, it is called “Service.” During service, hard water flows from the house main water pipe into the water softening system. Inside the water softening system resin tank is a bed made up of thousands of tiny, plastic resin beads. As hard water passes through the bed, each bead attracts and holds the hard minerals. This is called ion-exchanging. It is much like a magnet attracting and holding metals. Water without hard minerals (soft water) flows from the water softening system and to the house pipes.

After a period of time, the resin beads become coated with hard minerals and they have to

be cleaned. This cleaning is called regeneration, or recharge. Regeneration is started at 2:00 AM (factory setting) by the water softening system control, and consists of five stages or cycles. These are FILL, BRINING, BRINE RINSE, BACKWASH and FAST RINSE.

Safety Instructions

Automatic Hard Water Bypass During Regeneration

For emergency needs, hard water is available to

However, you should avoid using HOT water because

the home during the regeneration cycles.

the water heater will fill with the hard water.

Operating

Fill

Salt dissolved in water is called brine. Brine is needed to clean the hard minerals from the resin beads. To make the brine, water flows into the salt storage area during the fill stage as shown.

Soft water

 

 

 

 

Hard water

OUT

 

 

 

 

IN

 

 

 

 

 

 

 

 

 

Salt storage tank

Brine valve

Fill water

Brining

During brining, brine travels from the salt storage area into the resin tank. Brine is the cleaning agent needed to remove hard minerals from the resin beads. The hard minerals and brine are discharged to the drain.

The nozzle and venturi create a suction to move the brine, maintaining a very slow rate to get the best resin cleaning with the least salt.

Hard water

 

 

Hard water

bypass OUT

 

 

IN

 

 

Nozzle &

Drain

venturi

 

Brine

 

valve

 

Brine

 

Brine Rinse

After a pre-measured amount of brine is used, the brine valve closes. Water continues to flow in the same path as during brining, except for the discontinued brine flow. Hard minerals and brine flush from the resin tank to the drain.

Backwash

During backwash, water travels up through the resin tank at a fast flow rate, flushing accumulated iron, dirt, and sediments from the resin bed and to drain.

Hard water

Hard water

bypass OUT

IN

 

Drain

Fast Rinse

Backwash is followed by a fast flow of water down through the resin tank. The fast flow flushes brine from the bottom of tank, and packs the resin bed.

After fast rinse, the water softening system returns to soft water service.

Soft water

Hard water

OUT

IN

 

Drain

Instructions

Troubleshooting Tips

Customer Service

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Part No C1002P001-2 Pub. No -5799-212-97CG Water Softening SystemCongratulations You are Now Part of the GE Family Safety InformationService Telephone Safety Precautions Safety Instructions About the water softener system Set Water Hardness Number Control Settings RequiredSet Present Time of Day Feature Program Memory Feature Optional Recharge ControlsFeature/Service Automatic Electronic Diagnostics Set Regeneration Starting TimeTo remove an error code 1 Unplug transformer Service Timer/Softener, Service Checkout ProcedurePower loss ERROpen a Nearby Soft Water Faucet Electronic Diagnostics Care and cleaning of the water softening systemChecking the Salt Storage Level and Refilling If the water softening system does not draw brine, checkSanitizing Procedure Cleaning Iron Out of the Water Softening SystemClean the Nozzle and Venturi Assembly Care and cleaning of the water softener systemTighten the cap or housing Breaking a Salt BridgeBefore you call for service… Water. Note Be sure sample Problem Possible Causes What To Do No soft waterSingle lever kitchen faucet, if WaterPage Page We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace, At No Charge To You GE Reverse Osmosis System WarrantyWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYGE Answer Center Service Telephone Numbers

GNSF23Z01, GNSF18Z01, GNSF35Z01 specifications

The GE GNSF series, which includes models GNSF18Z01, GNSF35Z01, and GNSF23Z01, represents a significant stride in the realm of energy-efficient heating and cooling solutions. These heat pump systems are designed to cater to both residential and commercial applications, making them versatile options in a range of settings.

The GNSF18Z01 model is a compact yet powerful option, featuring a 1.5-ton cooling capacity with a SEER rating of up to 18, ensuring excellent energy efficiency. This model utilizes a scroll compressor, known for its durability and quiet operation. Its environmentally friendly refrigerant, R-410A, helps reduce greenhouse gas emissions while delivering optimal cooling performance. Moreover, the easy-to-use programmable thermostat enhances user control over energy consumption, allowing homeowners to manage their comfort levels more effectively.

Similarly, the GNSF23Z01 model stands out with its 2-ton capacity, featuring a slightly higher SEER rating. This model is ideal for larger spaces that require robust cooling and heating support. The technology embedded in the GNSF23Z01 also includes variable speed operation, which adjusts to the cooling demand in real-time, providing significant energy savings. The model’s advanced air filtration system contributes to improved indoor air quality by capturing dust, allergens, and other particulate matter.

The GNSF35Z01 model offers even greater efficiency with its 3-ton cooling capacity and an impressive SEER rating that surpasses many competitors in the marketplace. This heat pump incorporates advanced smart technology, allowing integration with home automation systems. Users can easily monitor and adjust settings remotely through mobile applications, providing unparalleled convenience. The GNSF35Z01 also emphasizes sustainability with its energy-saving features, aligning with modern eco-friendly practices.

In addition to energy efficiency, all three models share a focus on quiet operation, streamlined design, and ease of installation, making them suitable for various building structures. Their robust construction ensures longevity and reliability, contributing to lower maintenance costs over their lifespan. Overall, the GE GNSF18Z01, GNSF35Z01, and GNSF23Z01 heat pumps are exemplary choices for anyone seeking efficiency, comfort, and advanced technology in their heating and cooling systems.
Top Page Image Contents