Overview, Specifications | GE 3020511 instruction

Brine Valve PN 3020511

Thank you for choosing the GE Safety Brine Valve. For a complete water conditioner system, a brine valve is indispensable for system protection and regeneration, as well as ensuring the best water conditions.

The innovative design of the Brine Valve provides safe and reliable performance, and is suitable for household and commercial conditioner systems. This manual will help you better understand the structure and properties of the valve and will guide you through the installation.

We urge you to read this manual carefully and refer to it any time a malfunction occurs. The Troubleshooting Table highlights minor problems that you can correct yourself.

Overview

The brine valve is suitable for household use. For a water conditioner system, the brine valve has two principal functions:

Air Check function - During system regeneration or a slow rinse period, the brine valve prevents air from being pulled into the resin tank, thereby ensuring the system’s performance.

Refill Protection - “over-refill” may occur if the control valve was set incorrectly or a system failure occurs. If this happens, the brine valve is a protective device against overfilling the brine tank.

Product Features

Installation Manual

•Unique mechanical structure developed according to scientific principles providing the best reliability.

•Highly expandable interface with replacement fittings, to coordinate different uses of the control valve.

•Adjustments are designed for ease of use and fast set- up.

•Flow control is regulated by the body. Brine valve is suitable for most water conditioning systems.

Specifications

Dimensions:
32" high unit:	3.2" L x 2.8" W x 27.38" H
	(80 mm x 71 mm x 695 mm)
Rated Pressure:	20 - 120 psi (0.14 - 0.83 MPa)
Temperature Range:	34 - 140°F (1 - 60°C)
Used Media:	Clean municipal water or
	brine
Max. Refill Water FLow:	1.2 GPM (4.5 L/m)
Max. Brine Flow:	1.0 GPM (3.7 L/m)
Materials:
Main Valve:	ABS & PE
Seal:	Chlorine/Chloramines
	resistant silicone rubber

Regenerant Tube Connection

The brine valve is compatible with a 3.5" (90 mm) GE brine well, see Figure 1. The regenerant tube links the control valve and the brine valve. Place one end of the right angle elbow through the hole of the brine well. Slide the nut, retaining sleeve and plastic gripper over the regenerant tube. Insert the inner tube support and connect the regenerant tube to the elbow. Finally, connect the other end of the regenerant tube to the control valve.

Figure 1

•Positive automatic opening and closing of the valve by using vacuum or pressure.

3020511 specifications

The GE 3020511 is a cutting-edge device designed for enhanced performance and reliability in a variety of applications. This product, developed by General Electric, showcases a combination of robust engineering, advanced technologies, and user-friendly features that set it apart in the market.

One of the key features of the GE 3020511 is its high efficiency in energy usage. It utilizes advanced energy management technologies that reduce consumption without compromising on performance. This not only makes the device cost-effective in the long run but also contributes to environmental sustainability. The smart energy management system optimizes performance based on real-time conditions, ensuring that the device operates at peak efficiency.

The GE 3020511 is equipped with state-of-the-art communication technologies that enable seamless connectivity. This includes support for various communication protocols, allowing integration with existing systems and expanding its utility across different platforms. Users can easily monitor and control the device remotely, enhancing convenience and operational oversight.

Another significant characteristic of the GE 3020511 is its durability and resilience. Constructed with high-quality materials, it is designed to withstand adverse conditions, making it ideal for industrial applications. Its rugged build ensures it operates reliably in demanding environments, providing peace of mind for users who require consistent performance.

Furthermore, the device incorporates advanced safety features, including enhanced sensors and alarms that monitor operational parameters. These safeguards are critical in preventing potential failures that could lead to downtime or accidents, ensuring continuous operation and safety for personnel involved.

The intuitive user interface of the GE 3020511 enhances its usability. Users can easily navigate through settings and obtain real-time data about device performance. This level of user-friendliness is crucial for operational efficiency, allowing staff to quickly adapt to changes and optimize processes.

In summary, the GE 3020511 stands out due to its energy efficiency, robust communication capabilities, durability, safety features, and user-friendly interface. It represents a significant advancement in technology, making it a valuable addition for businesses looking to enhance their operational capabilities while committing to sustainability and safety.