GE PNRV18ZWW01, PNRV18ZWH01 Safety, Care, Tips Consumer Support, Faucet and Indicator Lights

Page 5
Open the RO water faucet to drain the storage tank.

www.GEAppliances.com

The Faucet and Indicator Lights

Safety

Faucet and Electronics—The countertop faucet dispenses filtered drinking water when opened. It has a hand-operated, spring-loaded lever to prevent waste. You can keep the faucet open by pushing upward on the lever, until it locks against the faucet spout.

To comply with plumbing codes, an air gap is built into the faucet drain water connection.

The electronic faucet provides an integrated TDS monitor. As water is taken from the faucet, the indicator lights show how the Reverse Osmosis system is operating to provide high quality drinking water.

Flashing Green Light—The Reverse Osmosis system is providing high quality drinking water.

NOTE: If the Reverse Osmosis system is connected to the refrigerator, this light will also flash when the icemaker or water dispenser is in use. The green light may stop flashing when the supply of Reverse Osmosis water is nearly gone and flow from the RO faucet decreases. This is a normal condition.

Flashing Amber “FILTER” Light—The prefilter and postfilter cartridges need replacing. See the Care and Cleaning section.

Flashing Amber “RO” Light—The Reverse Osmosis cartridge is no longer removing at least 75% of the TDS from the supply water and needs replacing. See the Care and Cleaning section for Reverse Osmosis cartridge replacement. NOTE: Disregard initial or short periods (a few seconds) of the flashing “RO” light. Long periods of limited or non use can cause the TDS levels to temporarily change.

Instructions Operating Instructions

If the Reverse Osmosis Filtration System Is Connected to Your Icemaker

Before you service the filter, change the filters, or purge the Filtration system, YOU MUST turn off the icemaker by raising the feeler arm. Four hours after servicing your unit, lower the feeler arm to resume icemaking.

Care

Purging the Reverse Osmosis System

Required upon initial installation or after the Reverse Osmosis cartridge is replaced.

CAUTION: The Reverse Osmosis cartridge contains a food grade preservative that should be purged from the system before first use or whenever the Reverse Osmosis cartridge is replaced. The preservative will give product water an unpleasant taste and odor.

1 Make sure all tubing connections are tightened.

2 Make sure the red tank shutoff valve is open. Turn on the water supply valve to the Reverse Osmosis system.

4

5 Close the RO water faucet after draining. Wait four hours until system has refilled. Then open the RO faucet to drain the storage tank.

6 Repeat the purging process for a total of four times.

7 The system is ready to make product water for your use.

and Cleaning Troubleshooting

3

In about four hours, pressure will start

RO product

 

to build in the Reverse Osmosis system.

water faucet

 

At that time, carefully check all fittings

 

 

and tubing connections for any water

 

 

leaks. Correct leaks if any are found.

 

 

Water supply valve

Drain line

 

 

 

 

Sink p-trap

 

1/4″ tubing, marked

Tank shutoff valve

 

CLOSED OPEN

 

WATER SUPPLY

 

 

 

Electronics box

 

 

FLOW

Battery pack

3/8″ tubing, marked FAUCET

1/4″ tubing, marked 1/4″ BARB

Automatic shutoff assembly

Leadwires

5

Tips Consumer Support

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model number Serial number 215C1002P010 49-500657227996 10-00 JRConsumer Cleaning Operating InstructionsProduct height 21″ width 8 ″ depth 10 ″ Specification guidelinesAbout the reverse osmosis system Faucet and Indicator Lights SafetyCare Tips Consumer SupportInstructions Safety Instructions Care and cleaning-Filter replacement proceduresTo obtain replacement filters, call GE Appliance Parts at Remove the FiltersReplace the Filters Sanitize the SystemPage Reverse Osmosis Cartridge Replacement Care and cleaning-RO cartridge replacementInstructions Operating Instructions Flow Control and ScreenSanitizing the Reverse Osmosis System Care and cleaning of the reverse osmosis systemBattery Replacement Page Before you call for service… Odor in the Reverse Chlorine taste and/orOsmosis product water Other taste and/or odorLow flow from No WaterFaucet LeaksCleaning Troubleshooting Tips Consumer Support GE Reverse Osmosis System WarrantySafety Instructions Operating Parts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

PNRV18ZBB01, PNRV18ZWW01, PNRV18ZBL01, PNRV18ZWH01, PNRV18ZCC01 specifications

The GE PNRV series, including models PNRV18ZCC01, PNRV18ZWH01, PNRV18ZBL01, PNRV18ZWW01, and PNRV18ZBB01, represents a line of versatile and efficient appliances designed to meet modern refrigeration needs. These models are equipped with advanced features and technologies that enhance user convenience, maximize energy efficiency, and ensure robust food preservation.

At the forefront of the PNRV series is the Fresh Food and Freezer compartments, which offer ample storage space, making it easier to organize groceries. Each model is designed with adjustable shelving and bins that cater to various storage needs, allowing users to customize their fridge layout to suit their convenience. Furthermore, the built-in humidity-controlled crisper drawers help maintain optimal moisture levels, ensuring fruits and vegetables remain fresh for longer periods.

A significant feature of the PNRV series is the Energy Star certification. These refrigerators are engineered to consume less electricity, making them an eco-friendly choice while also helping homeowners save on their energy bills. With innovative technologies such as the advanced cooling system, these appliances maintain stable temperatures and minimize temperature fluctuations, which is crucial for food safety and preservation.

Additionally, the GE PNRV series incorporates a Smart Diagnose feature, simplifying troubleshooting for users. This technology enables the refrigerator to communicate performance information and problem areas directly to service technicians, reducing the time and cost associated with traditional repairs.

Aesthetically, the PNRV models are available in a range of stylish finishes, including stainless steel, black, and white, allowing for seamless integration into various kitchen designs. The sleek exterior, combined with a user-friendly interface, adds a modern touch to any home.

Lastly, the quiet operation of these refrigerators ensures they don’t disrupt daily activities, which is especially important in open-concept living spaces. Overall, the GE PNRV18Z series stands out for its combination of innovative technology, energy efficiency, and functional design, making it a smart choice for contemporary households seeking reliable refrigeration solutions.
Top Page Image Contents