Harman-Kardon 210 owner manual Preset Stations Selector Press this, See

Page 6

Front Panel Controls

7Surround Mode Selector: Press this but- ton to change the surround mode by scrolling through the list of available modes. Note that depending on the type of input, some modes are not always available. (See page 25 for more information about surround modes.)

8Tuning Selector: Press the left side of the button to tune lower-frequency stations and the right side of the button to tune higher-frequency stations. When a station with a strong signal is reached, the TUNED indicator V will be illuminated in the Main Information Display ó .

To tune manually, tap the button lightly and note that the tuner will step up one frequency increment per button press. When the button is held for a few seconds you will note that the unit will quickly search the frequency band. Release it once the fast tuning starts; the tuner will automatically scan for the next station with an acceptable signal and then stop.

9Tuner Band Selector: Pressing this button will automatically switch the AVR 210 to the Tuner mode. Pressing it again will switch between the AM and FM frequency bands. (See page 28 for more information on the tuner.)

)Preset Stations Selector: Press this

button to scroll up or down through the list or stations that have been entered into the preset memory. (See page 28 for more information on tuner programming.)

!Input Source Selector: Press this button to change the input by scrolling up or down through the list of input sources.

@FM Mode Selector: Press this button to select Auto or Manual tuning. When the button is pressed so that the AUTO indicator Wlights, the tuner will search for the next station with an acceptable signal when the Tuning Selector 8uis pressed. When the button is pressed so that the AUTO indicator Wis not lit, each press of the Tuning Selector 8uwill increase the frequency. (See page 28 for more information on using the tuner.)

#Digital Optical 3 Input: Connect the opti- cal digital output of an audio or video product to this jack. When the Input is not in use, be certain to keep the plastic cap installed to avoid dust contamination that might degrade future performance.

$Digital Coax 3 Jack: This jack is used for connection to the output of portable audio devices, video game consoles or other products that have a coax digital jack.

%Video 4 Video Input Jacks: These jacks may be used for temporary connection to the composite or S-Video output of video games, camcorders or other portable video products.

^Video 4 Audio Input Jacks: These audio/video jacks may be used for temporary connection to video games or portable audio/video products such as camcorders and portable audio players.

&Bass Control: Turn this control to modify the low frequency output of the left/right chan- nels by as much as ±10dB. Set this control to a suitable position for your taste or room acoustics.

*Balance Control: Turn this control to change the relative volume for the front left/right channels.

NOTE: For proper operation of the surround modes this control should be at the midpoint or “12 o’clock” position.

(Treble Control: Turn this control to modify the high frequency output of the left/right chan- nels by as much as ±10dB. Set this control to a suitable position for your taste or room acoustics.

îVolume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the AVR 210 is muted, adjusting volume control will automatically release the unit from the silenced condition.

ïSet Button: When making choices during the setup and configuration process, press this button to enter the desired setting as shown in the Main Information Display óinto the AVR 210’s memory. The set button may also be used to change the display brightness.

(See page 31.)

ðInput Indicators: A green LED will light in front of the input that is currently being used as the source for the AVR 210.

ñDelay: Press this button to begin the sequence of steps required to enter delay time settings. (See page 18 for more information on delay times.)

òDigital Input Selector: When playing a source that has a digital output, press this button to select between the Optical #h and Coaxial $i Digital inputs. (See pages 26–28 for more information on digital audio.)

óMain Information Display: This display delivers messages and status indications to help you operate the receiver. (See pages 7–8 for a complete explanation of the Information Display.)

ôChannel Select Button: Press this button to begin the process of trimming the channel output levels using an external audio source. (For more information on output level trim adjustment, see page 29.)

õSpeaker Select Button: Press this button to begin the process of selecting the speaker positions that are used in your listening room. (See page 19 for more information on speaker setup and configuration.)

öTest Tone Selector: Press this button to begin the process of adjusting the channel out- put levels using the internal test tone as a ref- erence. (For more information on output level adjustment, see page 21.)

÷Surround Mode Indicators: A green LED will light in front of the surround mode that is currently in use.

øRemote Sensor Window: The sensor behind this window receives infrared signals from the remote control. Aim the remote at this area and do not block or cover it unless an external remote sensor is installed.

6FRONT PANEL CONTROLS

Page 5 Page 7
Image 6
Page 5 Page 7
Contents AVR 210 Audio/Video Receiver AVR 210 Audio/Video Receiver Description and Features IntroductionWhile complex digital systems are hard Safety Information Important Safety InformationUnpacking Set Button ð Input Indicators ñ Delay Front Panel ControlsPreset Stations Selector Press this SeeNight Mode Indicator This indicator Front Panel Information DisplayFront Panel Information Display £ Video 1 Audio Inputs Rear Panel ConnectionsTape Inputs Surround Speaker Outputs Tape Outputs KVideo 3 Audio InputsRear Panel Connections Remote Control Functions MuteRemote Control Functions ` Preset Up/Down When the tuner is Channel Direct Input » as the sourceAudio Equipment Connections Installation and ConnectionsSystem Installation Connect the analog output of a CD player to the CD inputs ¥AC Power Connections System and Power ConnectionsExternal Audio Power Amplifier Connections Video Connection NoteSpeaker Placement System ConfigurationSpeaker Selection and Placement System SetupPlug the Power Cable ¡ into an unswitched AC outlet Using the On-Screen DisplaySetting the System Configuration Memories Input Setup Surround SetupDelay Settings Night Mode Settings Speaker SetupSurround If no subwoofer is connected toPress and hold the SPL Indicator Select Output Level AdjustmentUsing EzSet For three seconds. Release the buttonTo return to the Master Menu Level. This is a normal aspect of the system’s operationAdditional Input Adjustments Operation Basic OperationSource Selection Surround Mode Chart Selecting a Digital Source Surround Mode SelectionDigital Audio Playback Dolby DigitalNight Mode Digital Status IndicatorsAddition to the bitstream indicators, Or PCMPCM Audio Playback Preset TuningTuner Operation MP3 Audio PlaybackNormal output level adjustment for Output Level Trim AdjustmentRecalling Preset Stations Tape RecordingMemory Backup Channel Direct InputTo enter this setting Advanced FeaturesTurn On Volume Level Semi-OSD SettingsFull-OSD Time Out Adjustment Programming the Remote Programming the RemoteMacro Programming Erasing Macro CommandsMode Selector/Channel Down button j Press the AVR Selector fVolume Punch-Through Channel Control Punch-ThroughTransport Control Punch-Through Resetting the Remote Memory Reassigning Device Control SelectorsStay amber Function List Direct Preset UpPreset Down ClearSetup Code Table TV 001 011 033 044 050 074 001 074 148011 013 069 001 011 033 042 044 100 154 160 167 168Setup Code Table VCR 019 027 052 037 039 040 071037 039 040 058 071 075 087 002 020Setup Code Table CD 022 047 079 091 148 013 107120 124 047 054 055 056 091 093 102 103 106 162 163 164Setup Code Table DVD Setup Code NumberSetup Code Table SAT Setup Code Table CBL 003 018 047 048 052 130 145 183 203 063 115 187037 072 186 001 188Information from nonencoded programs Troubleshooting GuideProcessor Reset Lights, motors or other electrical appliancesTechnical Specifications Page Harman Kardon, Incorporated Part No. J90200012400

210 specifications

The Harman-Kardon 210 is a standout product in the realm of audio equipment, embodying a rich heritage of exceptional sound quality and design. Known for its sleek construction and advanced technology, the 210 appeals to both audiophiles and casual listeners seeking high-fidelity audio experiences.

One of the key features of the Harman-Kardon 210 is its powerful amplification capabilities. With a robust output that can easily drive a range of speakers, this model ensures immersive sound quality across various genres of music. The amplifier is designed to deliver clear dynamics while maintaining a balanced audio profile, allowing listeners to appreciate the subtleties in every note.

The Harman-Kardon 210 also incorporates state-of-the-art digital signal processing technology. This technology enhances sound reproduction, ensuring that audio is not only loud but also rich and defined. The processing algorithms work meticulously to eliminate distortion, providing a cleaner and more engaging listening experience.

Connectivity options are another highlight of the Harman-Kardon 210. It offers multiple inputs, including optical, coaxial, and analog connections, making it compatible with various audio sources such as TVs, Blu-ray players, and gaming consoles. Built-in Bluetooth allows for seamless wireless streaming from smartphones and tablets, giving users the flexibility to enjoy their favorite tracks from any device.

Design-wise, the Harman-Kardon 210 stands out with its modern aesthetics, featuring a streamlined profile that fits effortlessly into any home décor. The front panel is user-friendly and intuitively laid out, allowing for easy navigation through different settings and inputs. The combination of premium materials and meticulous craftsmanship ensures durability while enhancing its visual appeal.

Moreover, the Harman-Kardon 210 supports multiple audio formats, ensuring broad compatibility with various sources, including high-resolution audio files. This versatility allows audiophiles to experience their music in the highest fidelity possible.

In conclusion, the Harman-Kardon 210 is a comprehensive audio solution that combines power, precision, and versatility. With its advanced amplification, digital processing technologies, and stylish design, it is an ideal choice for anyone looking to enhance their home audio setup. Whether enjoying a quiet evening of music or hosting a lively gathering, the Harman-Kardon 210 delivers an unforgettable auditory experience.
Top Page Image Contents