Harman-Kardon 210 Reassigning Device Control Selectors, Resetting the Remote Memory, Stay amber

Page 36

Programming the Remote

the Input Selector eand the Program/ SPL Indicator cflashes amber.

2.Press the Play button x. The Program/SPL Indicator cwill stop flashing and

stay amber.

3.Press and release the Input Selector button efor the device that will be used to change the channels. The Program/SPL Indicator cwill blink green three times and then go out to confirm the data entry.

Example: To control the transport of a DVD player while the remote is set to control the TV, first press the VID 2/TV Input Selector but- ton e and the Mute button 38 at the same time. Next, release them and press the Play button x, followed by the DVD Input Selector button e.

NOTE: To remove the Channel Control Punch- Through and return the remote to its original con- figuration, repeat the steps shown in the example above. However, press the VID 2/TV Input Selector in Steps 1 and 3.

NOTE: Before programming the remote for Volume, Channel or Transport Punch-Through, make certain that any programming needed for the specific TV, CD, DVD, Cable or Satellite Receivers has been completed.

Reassigning Device Control Selectors

Although each Input Selector eis normally assigned to the category of product shown on the remote, it is possible to reassign one of these but- tons to operate a second device of another type. For example, if you have two VCRs but no satellite receiver, you may program the “SAT” button to operate a second VCR. Before following the nor- mal programming steps for either Three-Digit entry or Auto Search code entry, you must first reassign the button with the following steps:

1.Press the Input Selector eyou wish to reassign and the Mute button 38 at the same time until the red light appears under the Input Selector e and the Program/ SPL Indicator c flashes amber.

2.Press the Input Selector e for the device you wish to program into the reassigned button.

3.Enter the three-digit code for the specific model you wish the reassigned button to operate.

4.Press the same Input Selector epressed in Step 1 once again to store the selection. The red LED under the reassigned Input Selector will flash three times and then go out.

Example: To use the CBL/SAT button to oper- ate a second VCR, first press the CBL/SAT Input Selector eand the Mute button

38 at the same time until the red light glows under the CBL/SAT ebutton. Press the VCR ebutton, followed by the three-digit code for the specific model you wish to control. Finally, press the CBL/SAT ebutton again.

Resetting the Remote Memory

As you add components to your home-theater sys- tem, occasionally you may wish to totally repro- gram the remote control without the confusion of any commands, macros or ”Punch-Through“ pro- gramming that you may have done. To do this, it is possible to reset the remote to the original factory defaults and command codes by following these steps. Note, however, that once the remote is reset, all commands or codes that you have entered will be erased and will need to be re- entered:

1.Press any of the Input Selector buttons e and the ”O“ button rat the same time until the Program/SPL Indicator cbegins to flash amber.

2.Press the ”3“ button rthree times.

3.The red LED under the Input Selector ewill go out and the Program/SPL Indicator c will stop flashing and turn green.

4.The Program/SPL Indicator cwill remain green until the remote is reset. Note that this may take a while, depending on how many commands are in the memory and need to be erased.

5.When the Program/SPL Indicator cgoes out, the remote has been reset to the factory settings.

36PROGRAMMING THE REMOTE

Page 35 Page 37
Image 36
Page 35 Page 37
Contents AVR 210 Audio/Video Receiver AVR 210 Audio/Video Receiver Description and Features IntroductionWhile complex digital systems are hard Safety Information Important Safety InformationUnpacking Set Button ð Input Indicators ñ Delay Front Panel ControlsPreset Stations Selector Press this SeeNight Mode Indicator This indicator Front Panel Information DisplayFront Panel Information Display Rear Panel Connections Tape Inputs Surround Speaker Outputs Tape Outputs£ Video 1 Audio Inputs KVideo 3 Audio InputsRear Panel Connections Remote Control Functions MuteRemote Control Functions ` Preset Up/Down When the tuner is Channel Direct Input » as the sourceInstallation and Connections System InstallationAudio Equipment Connections Connect the analog output of a CD player to the CD inputs ¥System and Power Connections External Audio Power Amplifier ConnectionsAC Power Connections Video Connection NoteSystem Configuration Speaker Selection and PlacementSpeaker Placement System SetupPlug the Power Cable ¡ into an unswitched AC outlet Using the On-Screen DisplaySetting the System Configuration Memories Input Setup Surround SetupDelay Settings Night Mode Settings Speaker SetupSurround If no subwoofer is connected toOutput Level Adjustment Using EzSetPress and hold the SPL Indicator Select For three seconds. Release the buttonTo return to the Master Menu Level. This is a normal aspect of the system’s operationAdditional Input Adjustments Operation Basic OperationSource Selection Surround Mode Chart Surround Mode Selection Digital Audio PlaybackSelecting a Digital Source Dolby DigitalDigital Status Indicators Addition to the bitstream indicators,Night Mode Or PCMPreset Tuning Tuner OperationPCM Audio Playback MP3 Audio PlaybackOutput Level Trim Adjustment Recalling Preset StationsNormal output level adjustment for Tape RecordingMemory Backup Channel Direct InputAdvanced Features Turn On Volume LevelTo enter this setting Semi-OSD SettingsFull-OSD Time Out Adjustment Programming the Remote Programming the RemoteErasing Macro Commands Mode Selector/Channel Down button jMacro Programming Press the AVR Selector fVolume Punch-Through Channel Control Punch-ThroughTransport Control Punch-Through Resetting the Remote Memory Reassigning Device Control SelectorsStay amber Function List Preset Up Preset DownDirect ClearSetup Code Table TV 001 074 148 011 013 069001 011 033 044 050 074 001 011 033 042 044 100 154 160 167 168Setup Code Table VCR 037 039 040 071 037 039 040 058 071 075 087019 027 052 002 020Setup Code Table CD 013 107 120 124022 047 079 091 148 047 054 055 056 091 093 102 103 106 162 163 164Setup Code Table DVD Setup Code NumberSetup Code Table SAT Setup Code Table CBL 063 115 187 037 072 186003 018 047 048 052 130 145 183 203 001 188Troubleshooting Guide Processor ResetInformation from nonencoded programs Lights, motors or other electrical appliancesTechnical Specifications Page Harman Kardon, Incorporated Part No. J90200012400

210 specifications

The Harman-Kardon 210 is a standout product in the realm of audio equipment, embodying a rich heritage of exceptional sound quality and design. Known for its sleek construction and advanced technology, the 210 appeals to both audiophiles and casual listeners seeking high-fidelity audio experiences.

One of the key features of the Harman-Kardon 210 is its powerful amplification capabilities. With a robust output that can easily drive a range of speakers, this model ensures immersive sound quality across various genres of music. The amplifier is designed to deliver clear dynamics while maintaining a balanced audio profile, allowing listeners to appreciate the subtleties in every note.

The Harman-Kardon 210 also incorporates state-of-the-art digital signal processing technology. This technology enhances sound reproduction, ensuring that audio is not only loud but also rich and defined. The processing algorithms work meticulously to eliminate distortion, providing a cleaner and more engaging listening experience.

Connectivity options are another highlight of the Harman-Kardon 210. It offers multiple inputs, including optical, coaxial, and analog connections, making it compatible with various audio sources such as TVs, Blu-ray players, and gaming consoles. Built-in Bluetooth allows for seamless wireless streaming from smartphones and tablets, giving users the flexibility to enjoy their favorite tracks from any device.

Design-wise, the Harman-Kardon 210 stands out with its modern aesthetics, featuring a streamlined profile that fits effortlessly into any home décor. The front panel is user-friendly and intuitively laid out, allowing for easy navigation through different settings and inputs. The combination of premium materials and meticulous craftsmanship ensures durability while enhancing its visual appeal.

Moreover, the Harman-Kardon 210 supports multiple audio formats, ensuring broad compatibility with various sources, including high-resolution audio files. This versatility allows audiophiles to experience their music in the highest fidelity possible.

In conclusion, the Harman-Kardon 210 is a comprehensive audio solution that combines power, precision, and versatility. With its advanced amplification, digital processing technologies, and stylish design, it is an ideal choice for anyone looking to enhance their home audio setup. Whether enjoying a quiet evening of music or hosting a lively gathering, the Harman-Kardon 210 delivers an unforgettable auditory experience.
Top Page Image Contents