Hellenbrand Means
Quality and Reliability
Since 1967, Hellenbrand Water Conditioners, Inc. has provided water solutions to the water treatment industry in the U.S. and around the world. We have developed a complete line of high quality products. An excellent example of this, is the Hellenbrand TNT Series Conditioners.
TNT Series Conditioners use a flanged top-mounted or optional side-mounted adapter, three-inch NPT inlet and outlet solid brass control valve with a motor-driven, time-tested, hydraulically-balanced piston with a seal and spacer concept to pilot service flow not dependent on water pressure. No diaphragms to rupture or false transfer. It will provide up to 170 gpm hard water by-pass during regeneration, or you may have the optional “no hard water by-pass piston” for twin or multiple systems. These high service flow rates, the simplified alternating and multiple lockout systems, eliminate the need for diaphragms, solenoids and stagers. The five cycle TNT controller is available with either downflow (co-current) or upflow (counter-current) brining, with easy adjustable cycle times. The TNT Series offers you a choice of mechanical or microprocessor controlled meter demand systems, with two-inch or three-inch meter turbines. All systems are fac- tory-wired and tested electrically to assure easy installation and correct operation.
| FRONT VIEW | BACK VIEW |
| Optional Inlet & Outlet Pressure Gauges & Soft Water | Optional Factory Installed Vacuum |
| Test Port |
| Breaker |
| |
| Controller | |
| Outlet | |
| Inlet | |
Inlet
Optional
2” Meter Outlet
TNT Series Control Valve -Three Inch Inlet/Outlet
1.Stainless Steel Backplate will not rust or corrode.
2.Factory provided Drain Line Flow Control maintains accurate backwash rates.
3.Three-Inch NPT Inlet & Outlet Connections.
4.Solid Brass Valve assures durability and long life.
5.Hydraulically-balanced Piston, Seal, and Spacers.
Lower service piston is available with or without hard water by-pass. Non-sticking Teflon-coated Piston al- lows foreign particles to pass through without damaging the unit.
6.Upper Piston pilots the regeneration steps of backwash, brine and slow rinse, fast rinse, and brine tank refill.
7.Separate “Time-fill” Brining with accurate flow controls allows automatic brine tank refill. Brine Tank Refill Rates are easily adjustable on the cycle program- mer. No need to worry about adjusting float valves or repositioning brine plugs for salt measurements.
8.Heavy-duty Drive Motor receives signal from timer to efficiently direct water flow during regeneration.
Piston shifts smoothly and quietly regardless of water pressure.
9.Lower Heavy-duty Drive Motor receives signal from upper drive motor to direct the service piston into posi- tion. Piston shifts smoothly and quietly regardless of
water pressure.
10. TNT Series Timer provides fully automatic, depend- able timing for regeneration. The Cycle Programmer regulates all regeneration cycles which are easily
adjustable. For manual regeneration start, simply turn
the service indicator clockwise.